Hello David,
I can use quicken 2003 okay with Jaws 10, but Jaws 9 did a much
better job with it.
I have several issues with Jaws 10 and Quicken 2003.
1. In Jaws 9 when you make a date change, Jaws will say the complete
date automatically. In Jaws 10, you have to do say line to hear the
date. This is also true for the payee, amount and the memo fields.
2. In Jaws 10, as you tab to the payee field, Jaws says Payee and
when you tab to the amount field, Jaws says not found, How do I?and
then says payee again.
3. In the payee and amount fields, as you type the information in,
Jaws 10 will not speak the completed text whereas in Jaws 9 will
speak the complete text when you finish.
4. In both Jaws 9 and Jaws 10, Jaws speaks payee again in the category field.
Any time I go into Quicken, I unload Jaws 10 and bring up Jaws 9
since it seems to work better with that version. However, I would
like to keep Jaws 10 running instead of flipping back and forth.
Perhaps, these issues may be minor to most people, but I use Quicken
quite frequently. I really believe that Freedom Scientific is not
supporting Quicken mainly since Intuit are not the most friendly
people to deal with, at least that what I have heard.
One more note. I did notice that the scripts for Quicken in version
9 has scripts with the name Quicken2000 which is not included in Jaws
10 scripts. This may be due to the fact Jaws 10 does not support
window 2000 anymore?
Any comments, suggestions or advice on how to improve Quicken 2003
will greatly be appreciated. I noticed that Dana is using Quicken
2005, but I figured that it makes no sense to upgrade Quicken if
Freedom Scientific is not going to support it.
Thanks and try to say warm!
Lennie
At 07:46 PM 1/14/2009, you wrote:
There has not been a problem here at all. I've been using Quicken 2003 for
over 4 years already through versions of jaws right up until the present
day. What specifically is the issue. Honestly I've never looked at the
Quicken scripts to compare.
David Ferrin
I believe that tomorrow is another day, and I'll probably screw that one up
too.
----- Original Message -----
From: "Lennie Rinaldi" <[email protected]>
To: <[email protected]>
Sent: Wednesday, January 14, 2009 7:25 PM
Subject: [JAWS-Users] Quicken 2003 and Jaws 10
Hello everyone,
I have been using Quicken 2003 since it became available and I have
no problem with it in prior versions of Jaws.
Quicken is somewhat manageable in Jaws 10. However, I found that it
does not work quite as well with that version. I checked popular
application in Jaws 10 and Quicken is not listed, but it is listed in Jaws
9.
I also checked Quicken scripts for Jaws 10 and I noticed that there
are fewer scripts there than in Jaws 9.
Has anyone else having problems with Quicken in Jaws 10? I was
thinking of copying the scripts from Jaws 9 and insert them in Jaws
10, but I don't want to create more problems.
Any thoughts or suggestions would greatly be appreciated.
Thanks,
Lennie
Visit the JAWS Users List home page at:
http://www.jaws-users.com
Visit the Blind Computing home page at:
http://www.blind-computing.com
Address for the list archives:
http://www.mail-archive.com/[email protected]
To post to this group, send email to
[email protected]
To unsubscribe from this group, send an email to
[email protected]
For help from Mailman with your account Put the word help in the subject or
body of a blank message to:
[email protected]
Use the following address in order to contact the management team
[email protected]
If you wish to join the Blind Computing list send a blank email to the
following address:
[email protected]
Visit the JAWS Users List home page at:
http://www.jaws-users.com
Visit the Blind Computing home page at:
http://www.blind-computing.com
Address for the list archives:
http://www.mail-archive.com/[email protected]
To post to this group, send email to
[email protected]
To unsubscribe from this group, send an email to
[email protected]
For help from Mailman with your account Put the word help in the
subject or body of a blank message to:
[email protected]
Use the following address in order to contact the management team
[email protected]
If you wish to join the Blind Computing list send a blank email to
the following address:
[email protected]
Visit the JAWS Users List home page at:
http://www.jaws-users.com
Visit the Blind Computing home page at:
http://www.blind-computing.com
Address for the list archives:
http://www.mail-archive.com/[email protected]
To post to this group, send email to
[email protected]
To unsubscribe from this group, send an email to
[email protected]
For help from Mailman with your account Put the word help in the subject or
body of a blank message to:
[email protected]
Use the following address in order to contact the management team
[email protected]
If you wish to join the Blind Computing list send a blank email to the
following address:
[email protected]
