Fred, you need to obtain a licence from Freedom Scientific. This will
involve first attempting to activate using your existing JAWS serial number.
If that doesn't work you may have to contact your local distributor and
obtain either an upgrade or full licence, depending on your situation. Good
luck.
--
Chris Hallsworth
e-mail: [email protected]
MSN: [email protected]
Skype: chrishallsworth7266
----- Original Message -----
From: "Fred Adams" <[email protected]>
To: "jaws-users" <[email protected]>
Sent: Friday, January 30, 2009 10:23 PM
Subject: [JAWS-Users] Getting out of demo mode
I just got this computer out of the shop about an hour ago and it was in
demo mode when I got everything connected back up. I would appreciate it
if someone could tell me how to get out of demo mode. I always have
problems doing this. I never run in demo mode on purpose. Will appreciate
any help
Best Wishes,
FRED C. ADAMS W4HC
SOW TO THE WIND
AND REAP THE WHIRLWIND!!
Visit the JAWS Users List home page at:
http://www.jaws-users.com
Visit the Blind Computing home page at:
http://www.blind-computing.com
Address for the list archives:
http://www.mail-archive.com/[email protected]
To post to this group, send email to
[email protected]
To unsubscribe from this group, send an email to
[email protected]
For help from Mailman with your account Put the word help in the subject
or body of a blank message to:
[email protected]
Use the following address in order to contact the management team
[email protected]
If you wish to join the Blind Computing list send a blank email to the
following address:
[email protected]
Visit the JAWS Users List home page at:
http://www.jaws-users.com
Visit the Blind Computing home page at:
http://www.blind-computing.com
Address for the list archives:
http://www.mail-archive.com/[email protected]
To post to this group, send email to
[email protected]
To unsubscribe from this group, send an email to
[email protected]
For help from Mailman with your account Put the word help in the subject or
body of a blank message to:
[email protected]
Use the following address in order to contact the management team
[email protected]
If you wish to join the Blind Computing list send a blank email to the
following address:
[email protected]
