Hi, This is rather long but since it may help someone else, I'll explain what I did with this display. It turned out to be an Alva Delphi 40 cell after all. The German in the menue doesn't seem to matter as it works perfectly fine with Jaws10 after some tinkering. I didn't have a serial cable with both female ends so I tried a parallel cable but Jaws only offered com ports when adding a display. I modified the jfw.ini file replacing auto (which I tried first) with lpt1. That did the trick. I do get "the selected port is invalid" message if I look under advanced braille display options but since I don't want to change the port, I just continued setting options for the display. Maybe this will help someone with a similar situation.
Jon Visit the JAWS Users List home page at: http://www.jaws-users.com Visit the Blind Computing home page at: http://www.blind-computing.com Address for the list archives: http://www.mail-archive.com/[email protected] To post to this group, send email to [email protected] To unsubscribe from this group, send an email to [email protected] For help from Mailman with your account Put the word help in the subject or body of a blank message to: [email protected] Use the following address in order to contact the management team [email protected] If you wish to join the Blind Computing list send a blank email to the following address: [email protected]
