Do the following steps to label the "unread" and "attachment" graphics in
the message list, so they will be announced.
The most annoying flaw in JAWS 10 for me was that the graphics for unread
and attachment
status were not defined in a JAWS .JGF file! I ended up labeling these
graphics myself and it now works fine.
1. First make sure that within the Windows Live Mail application that it is
configured to read labeled graphics. Without Configuration Manager set this
way, the message status will never get read. You indicate this setting is
already set to "labeled".
2. Temporarily set the verbosity to read all graphics by pressing Insert +
V, then press G until you hear "Graphics". Press Space until it announces
"all", then hit Enter. .
3. Move to an unread message, then route the JAWS Cursor to the PC Cursor
and switch to the JAWS Cursor by pressing Insert + NumPad minus (-) followed
by the NumPad minus (-).
4. Move on top of the unnamed graphic to the left of the message by
pressing Control + Left arrow.
5. Press Insert + G to label the graphic. Type in "unread" without the
quotes, and hit Enter.
6. Press the NumPad plus (+) to make certain that the PC Cursor is enabled.
7. Move to a message with an attachment, then route the JAWS Cursor to the
PC Cursor and switch to the JAWS Cursor by pressing Insert + NumPad minus
(-) followed by the NumPad minus (-).
8. Move on top of the unnamed graphic to the left of the message by
pressing Control + Left arrow.
9. Press Insert + G to label the graphic. Type in "attachment" without the
quotes, and hit Enter.
10. Press the NumPad plus (+) to make certain that the PC Cursor is
enabled.
11. Set the verbosity back to read labeled graphics by pressing Insert + V,
then press G until you hear "Graphics". Press Space until it announces
"labeled", then hit Enter. .
Hopefully this will solve your issue. It did for me!
Don Marang
--------------------------------------------------
From: "Holger Fiallo" <[email protected]>
Sent: Monday, January 25, 2010 10:00 PM
To: <[email protected]>
Subject: Re: [JAWS-Users] jaws not saying unread
Yes. It says label. No I did not get the email. Now what. Again it says
label.
--------------------------------------------------
From: "Donald Marang" <[email protected]>
Sent: Monday, January 25, 2010 5:33 PM
To: <[email protected]>
Subject: Re: [JAWS-Users] jaws not saying unread
If you open the verbosity dialog with Insert + V, then press 'G' until
you hear "Graphics", does it indicate "All", Labeled", or "None"?
I sent you a detailed message yesterday with step by step instructions to
label the graphics if needed. If the answer to the above question is
"Labeled", then those steps should work. Let me know if you need them
sent again.
Don Marang
--------------------------------------------------
From: "Holger Fiallo" <[email protected]>
Sent: Monday, January 25, 2010 5:22 PM
To: <[email protected]>
Subject: [JAWS-Users] jaws not saying unread
Hi, all
This is the third time I requested help with this and got no respond. I
am using window 7, jaws 11 and window live message for email. When I get
emails, I do not hear unread. I did so in the beginning of using the
email program but now. Help please.
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
