Hi Betsy, I'm trying to install my Powerbraille 40.
Many years ago, when I got my laptop, I hooked up my Braille display from my
Pac Mate to it.
However, after my Braille Light died for the second time, I decided it was
time to give up on it and make my
Pack Mate take its place.
To that end, I wanted to rehook up the USB Focus Braille display to its Pack
Mate querty keyboard. This left my Laptop, with only USB connections,
displayless. Thus, my struggles began with trying to figure out how to get
my 16 year old, non-USB Power Braille to work with my laptop.
Well, that's probably loads more than you wanted to know, but "That's my
story, and I'm sticking to it"!
Thanks again for your help, I'm sure it will work as you told me, as soon as
I get the proper cord.
I'll let you know how it all turns out in the end.
Your friend, Vicky
----- Original Message -----
From: "Betsy Whitney, Dolphin Press" <[email protected]>
To: <[email protected]>
Sent: Tuesday, January 04, 2011 8:23 PM
Subject: Re: [JAWS-Users] Installing Braille display after Jaws
Hi Vicki,
I'm curious to know what display you are trying to install. I recently
installed an Apex and it was a little different. If that is the display
you're working with, the instructions for installing the Apex driver are
on the Humanware site.
I can email you the instructions off list if you would like.
Betsy
Recently Victoria Vaughan wrote:
Hi Betsy, Thank you for your helpful response! While I was following your
instructions, I found out I will need to switch my serial to USB cord to a
parallel to USB cord. When that is done, I'm sure all will work.
I'll let you know if it does.
Thanks again, Vicky
----- Original Message ----- From: "Betsy Whitney, Dolphin Press"
<[email protected]>
To: <[email protected]>
Sent: Tuesday, January 04, 2011 5:43 PM
Subject: Re: [JAWS-Users] Installing Braille display after Jaws
Vicki,
Just open JAWS, enter on Options, arrow down to braille, press enter, and
tab across to Add braille display.
Recently Victoria Vaughan wrote:
Hi, I need to either reinstall Jaws 11 or do a repair in order to get to
the custom install, where I can pick the type of Braille display I want
to add.
My question is, How do I tell the Jaws 11.01476.exe to let me add the
Braille display.
Sorry that I can't make it any clearer than that.
Can anyone help me?
Many thanks! Vicky
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
Send any questions regarding list management to:
[email protected]
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
Send any questions regarding list management to:
[email protected]
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
Send any questions regarding list management to:
[email protected]
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
Send any questions regarding list management to:
[email protected]
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
Send any questions regarding list management to:
[email protected]
