Hi Steven, Below is the link to a TSN that talks about this. Below that, is the steps I pulled from the TSN which should help you do it.
Regards, Eric http://www.freedomscientific.com/fs_support/BulletinView.asp?QC=1118 1. Press WINDOWS Key+R. 2. Choose the Browse button. 3. Navigate to the folder where the JAWS setup package is located. 4. Select the setup package file and press ENTER. 5. Press END and then press the SPACEBAR. 6. Type: /Type Repair - Repairs a typical installation of JAWS. Once the repair begins, you will not be able to cancel the operation. During the repair, progress dialogs are displayed and a clicking tone is played. At the end, you will be prompted to restart your computer -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Steven Hicks Sent: Tuesday, August 21, 2012 4:29 PM To: [email protected] Subject: [JAWS-Users] JAWS13 And Microsoft Windows 7 64 Hi friends, i want to run a repair on JAWS. I run the downloaded package and it says that the product is already installed, to modify it, use add remove programmes. i go to add remove programmes and press return on JAWS 13 and it only gives me an option to remove it. Do I have to run a full uninstall and then re-install to be able to repair it? For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
