Hey Geno, Excelent! That did the trick. Thanks. Scott Duck -----Original Message----- From: JAWS-Users-List [mailto:[email protected]] On Behalf Of Stormin Sent: Friday, May 31, 2013 11:08 AM To: [email protected] Subject: [JAWS-Users] Skype
On your Jaws 14 latest release, Windows 8 and Skype 6.2 and the latest is 6.3.. You should have Scripts from HTTP://www.dlee.org/skype So once with install and it will see nothing there, if one is there it will ask you to erase the old and say yes and the new is installed. It will see that you have Jaws 14 and bingo. This set of scripts won't anything earlier of 6.X Once that is done then go to Skype load it and then when up and running. Go to ALT-T in tools go to Options by pressing O, in this area. Press the end key tab at this point there will be a box that says enable hot keys check this with a space bar. Tab once and all the ones that are defined Check them with your space bar. click save. Also with these Scripts you can go into general tab in this and you will see an area that say: when I double click on a or hit enter Start a call with the person in my list, check this. If you have the scripts all you have to answer a call is ALT PAG UP and ALT Page Down disconnect. Valued information once Scripts are loaded? do a Insert H and all the short cuts are there and for Skype help is ALT H Good luck Skype is great Geno For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
