Do you have JAWS turned on to indicate OnMouseover links/elements? Did
JAWS say, "could not detect any changes", after the 3-in-1 keystroke? Or
did it say nothing, and treat it as an ordinary link? If the latter,
then you may not be doing the keystroke correctly, (thus my NOTE on it:
The JAWSkey [or Insert key] first; then the control and enter keys
together, in the three-in-one.) If possible, find some other OnMouseOver
link, which may be more amenable, on which to practise. If JAWS detects
a change after the onMouseover click, it will say, "change detected at
line xx" and will (I think) position you on that line or near it.
----- Original Message -----
From: "Joni Colver" <[email protected]>
To: <[email protected]>
Sent: Thursday, July 18, 2013 11:53 PM
Subject: Re: [JAWS-Users] Mouse over
Flor, I just tried that, but nothing changed. So, I will just have to
assume this particular link is JAWS-proof, unfortunately, unless
anyone else has some ideas. Thanks for your suggestion.
Joni
-----Original Message-----
From: Flor Lynch
After you've pressed the keys to find the MouseOver, which is what you
did, then press control+JAWSKey+enter to activate it. JAWS will then
tell you if it detected any changes. NOTE: It may be important to
press
the JAWSKey first, before the other two, for the key combo to work
properly.
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
