Hi John, Thank you very very much! Your steps sure make navigating Malware Bytes a whole lot easier! Take care. Mike This email was sent from my, iBarstool.
----- Original Message ----- From: John M. To: [email protected] Sent: Monday, September 23, 2013 9:38 AM Subject: Re: [JAWS-Users] Updating malwarebytes pro It is not necessary to use the Jaws cursor to navigate the Malwarebytes menus. Follow these three simple steps: 1. With Malwarebytes open, tab until you land on the Exit button. 2. Press the up arrow key once, which will place you on the menu which contains Scanner, Protection, Update, etc. 3. Hold down the Ctrl key and use the left and right arrows to navigate to the desired tab. Once on the desired tab, press the tab key to navigate through the options available within that particular tab. If you lose your place, just keep tabbing until you reach the Exit button and arrow up once. I have installed Malwarebytes Free and Pro many times and by default, it has always been configured to automatically update in the background. John ----- Original Message ----- From: "Mike B." <[email protected]> To: <[email protected]> Sent: Monday, September 23, 2013 11:12 AM Subject: Re: [JAWS-Users] Updating malwarebytes pro > Hi Greg, > > Below are steps on putting Malware Bytes updateing on a schedule: > > This is going to be tricky. So, I would suggest that you read through > these > steps a couple of times to get a good idea of what you will need to do to > access the tabs to change settings. I am writing these steps running > Malware Bytes Pro on a desktop computer > > running Jaws 13 & XP Pro. The routing of the Jaws cursor to the PC cursor > is > necessary to do this. Also, I'm assuming that Malware Bytes is running at > startup & is in the system tray. > 1. Go to the system tray, press enter on Malware Bytes to open, arrow down > to start scanner & press enter. > 2. Route the Jaws cursor to the PC cursor with insert + the numpad minus / > Jaws cursor key. Press the pageup key to take the cursor to the top of > the > page & arrow down 1 time. > 3. If you use your say line keystroke, insert + up arrow, you will hear > Jaws > read the following tabs. Scanner, Protection, Update, Quarantine, Logs > Ignore List Settings, More Tools & About. If you use your insert + right > & > left arrow keys to navigate by word you can navigate to the individual > tabs. > You want to navigate using insert + right arrow until you hear Protection > Tab. > Now, this is a little tricky! After you hear Protection Tab, use only the > arrow keys for this little move! After hearing Protection Tab, left arrow > 1 > time & you'll probably hear Jaws say blank, now right arrow a couple of > times until you hear Jaws say the first letter of, Protection, which is a > capital letter P. Remember you need to have the Jaws cursor routed to the > PC cursor for all this. > 4. While on the letter P, press the left mouse button 1 time, wait a > second > or 2, & press your PC cursor key to > > navigate this tab. > 5. Tab through here checking / unchecking what you want the program to > do. > When you get to the, Scheduler > > button, press the spacebar to open. > 6. When the scheduler opens you tab to add & press the spacebar. You will > have 2 jobs to create a schedule for, > > scan & update. I'll use update for this example. With th Update radio > button checked tab 1 time to the, > > Frequency combobox where you will have 4 choices hourly, daily, weekly, & > monthly. Arrow to the the 1 you > > want . This chooses how often you want Malware Bytes to check for > updates, > I have my program set on daily. > 7. Tab 1 time to, Recover if missed by combobox, & you arrow down to how > many days but, I personally can't > > explain what this is for. > 8. Tab 1 moere time to the next combobox & this is where you will set your > beginning date, time & AM / PM. In > > this combobox you will need to hold down the control key & use your arrow > keys. So, with the left control key > > held down press the right arrow key 1 time & arrow up or down to choose > the > month. Remember, do not let up > > on the control key during this process. After choosing the month, control > + > right arrow 1 more time to choose > > the date of the month, using control + up or down keys here. After > choosing > the date, control + right arrow to > > the year, control + up / down arrow to choose the year, control + right > arrow to the hour, control + up/ down > > arrow to choose, control + right arrow to minuts, control + up / down > arrow > to choose, & finally control + right > > arrow to A M / PM, control + up /down arrow to choose. Now, you can let > up > up on the control key & use your say > > line keystroke, insert + up arrow, to read the month, date, year, hour, > minutes, & A M or PM. If you need to make > > any changes remember to do it using the control & arrow keys in these > comboboxes. > 9. Tab 1 time to, repeating every combobox, this should be set on, 1. > 10. Tab through the rest of the checkboxes checking or unchecking the > options. > 11. Tab to save & press the spacebar, tab to exit, & press the spacebar. > Take care. > Mike > This email was sent from my, iBarstool. > > ----- Original Message ----- > From: Greg Washington > To: [email protected] > Sent: Monday, September 23, 2013 3:35 AM > Subject: Re: [JAWS-Users] Updating malwarebytes pro > > > Mike, > Thanks. I will give that a try. > Greg > > > -----Original Message----- > From: JAWS-Users-List [mailto:[email protected]] On > Behalf Of Mike B. > Sent: Sunday, September 22, 2013 10:26 PM > To: [email protected] > Subject: Re: [JAWS-Users] Updating malwarebytes pro > > Hi Greg, > > When you get that window, route your Jaws cursor to your PC cursor, press > the pageup key, & arrow down 1 line at a time to see if you can get any > other information from the window. I had to schedule Malware Bytes Pro up > to do updates automatically. To schedule it for scanning or updates you > do > it from the Protection Tab. > HTH > Take care. > Mike > This email was sent from my, iBarstool. > > ----- Original Message ----- > From: Greg Washington > To: [email protected] > Sent: Sunday, September 22, 2013 7:55 PM > Subject: Re: [JAWS-Users] Updating malwarebytes pro > > > George, > OK, thanks. I'll relax and see what happens with the updates occurring > without any intervention on my part. > Greg > > > -----Original Message----- > From: JAWS-Users-List [mailto:[email protected]] On > Behalf Of Jorge Rivas > Sent: Sunday, September 22, 2013 9:15 PM > To: [email protected] > Subject: Re: [JAWS-Users] Updating malwarebytes pro > > Greg, > It will update on it's own, sometimes 3 times in one day. > > HTH. > Jorge > > -----Original Message----- > From: JAWS-Users-List [mailto:[email protected]] On > Behalf Of Greg Washington > Sent: Sunday, September 22, 2013 9:20 PM > To: [email protected] > Subject: [JAWS-Users] Updating malwarebytes pro > > I have installed and activated malwarebytes Pro on my Windows 7 64 bit > computer running Jaws 13. I thought that the Pro edition updated itself > automatically. However, sometimes Jaws seems to read the update > Malwarebytes screen and wants me to click on yes. Do I need to do that or > will Malwarebytes update itself without me clicking on yes? > Thanks, > Greg Washington > > > > For answers to frequently asked questions about this list visit: > http://www.jaws-users.com/help/ > > > For answers to frequently asked questions about this list visit: > http://www.jaws-users.com/help/ > > > For answers to frequently asked questions about this list visit: > http://www.jaws-users.com/help/ > For answers to frequently asked questions about this list visit: > http://www.jaws-users.com/help/ > > > For answers to frequently asked questions about this list visit: > http://www.jaws-users.com/help/ > For answers to frequently asked questions about this list visit: > http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
