Hi Roj, To get JAWS to read column & row titles, do the following. 1. Click on the cell that intersects the title row and column. In most cases cell A1. 2. Right click and select "Define Name" 3. Type "Title.." without the quotes in the name field. It is important to type the 2 dots after Title. As the first dot defines the row and the second dot defines the column used. 4. Tab until you hear OK and press Enter. 5. Save your worksheet by hitting Ctrl + S. The procedure only works if you can edit and save the worksheet you are reading. Regards / Mes respects Guy Castonguay Ottawa, Canada
-----Original Message----- From: JAWS-Users-List [mailto:[email protected]] On Behalf Of Dave Maynard Sent: Monday, February 24, 2014 2:45 PM To: [email protected] Subject: Re: [JAWS-Users] excel question. Hello; I have never been able to get the procedure currently written in the tutorial to work. I have went back to the old way. Set the cursor on the cell that is common to the row and column that you want. Hold down the alt, jaws key and control key and press C for column and R for row. It is like playing a piano but it works. hth David Maynard Franklin NC [email protected] -----Original Message----- From: JAWS-Users-List [mailto:[email protected]] On Behalf Of RajTribhuwan Sent: Saturday, February 22, 2014 12:08 PM To: [email protected] Subject: [JAWS-Users] excel question. Hello guys, Problem. No matter what I try, cannot get Jaws 15, 14 or 13 so far to read row and column titles in excel 2010 and 2013. Urgent help needed. Thanks guys. Raj For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
