Mike, Kevin, James or anyone else using VIPRE, is there a ML for blind users, or a general users ML, and how to subscribe?
I'm still hesitant to upgrade to 2015 in fear that it won't be useable with JAWS 14. if I upgrade, is it possible to revert to 2014? will there be any residual effects from downgrading? any advise to offer? ----- Original Message ----- From: "Kevin Lee" <klee...@gmail.com> To: <jaws-users-list@jaws-users.com> Sent: Friday, March 13, 2015 11:08 PM Subject: Re: [JAWS-Users] vipre antivirus 2015 version 7 is 2014 version 2015 is 8, -----Original Message----- From: James if hooper Sent: Friday, March 13, 2015 6:23 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] vipre antivirus 2015 How do you find what version you are using I went to help it said version 7 I can't velieve it. -----Original Message----- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Michael Boyd Sent: Friday, March 13, 2015 7:14 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] vipre antivirus 2015 Kevin, After opening Vipre, tab down to the "My Vipre Navigation" and press enter on this. Now tab on down to "Manage Scheduled Scans". Next, tab down to either the Quick or Deep scan tab, and press the space bar on the one that you want to schedule. Here, it gets a little tricky, but go ahead and tab down further, and do not pay attention to what is checked, and what is not. You are going to hear that the Quick scan is checked, but you are actually going to schedule the Deep scan if that is what you select to do. Next, you will come to the area where you can set the hour of the start time for the scan, so just left or right arrow to set the hour to where you want it. Now, just tab down to set the minutes, they will be displayed in 5 minute intervals, then repeat the same action to set the time to AM or PM. OK, now tab down a couple of times and check the boxes for which days of the week you want the scan to run on. Lastly, tab down and select the Done button, and tab back around to schedule the Quick scans if you want them. Now, Vipre by default checks for new threat definitions every 30 minutes, but if you want to manually check for these, tab to the Manage tab and press enter on this. Next tab down twice, and you should find the Updates tab, and you can tab down from here to find the "Update definitions" item, and options to update Vipre software patches, and Vipre software updates. Note, if at any time you cannot find a particular item, try arrowing left or right to find it. As far as I can find, the function keys are not used for anything in this version of Vipre, although I have not tried all key combinations. I think this should get you up and running with it however, and if you have more questions, I am heere. Also, see the help search box and the users manual under the Account tab. Mike, mike....@comcast.net -----Original Message----- From: Kevin Lee Sent: Friday, March 13, 2015 11:55 AM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] vipre antivirus 2015 anyone know how to navigate vipre antivirus 2015 with jaws 16 navigating meaning selecting scan types (quick scan, eep scan) like in 2014 also are the f keys available for use as in 2014 like f5 to check for definitions. Email is golden!!! Kevin Lee For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
