Kimsan,
If you are selecting the line that you want to copy by holding down the
shift key and pressing the down arrow, I have gotten these same results. If
you are not doing so, try to select each word from the beginning to the end
by holding the shift key and the Insert + left arrow key to only select
exactly the words that you want to copy and paste.
Mike,
mike....@comcast.net
-----Original Message-----
From: Kimsan
Sent: Sunday, March 15, 2015 10:13 AM
To: jaws-users-list@jaws-users.com
Subject: Re: [JAWS-Users] copy, pasting and i.e. 11 using jfw 16
Rajiv:
That did not work. I just tried selecting the same block of text, and after
pasting, the entire document appeared instead of the line I selected.
Thank you...
-----Original Message-----
From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On
Behalf Of Rajiv Shah
Sent: Sunday, March 15, 2015 6:01 AM
To: jaws-users-list@jaws-users.com
Subject: Re: [JAWS-Users] copy, pasting and i.e. 11 using jfw 16
Hello Annette and all,I have found that when this occurs, go into the
verbosity (insert-V) and locate the virtual cursor category. Change the
setting from copy from on-screen highlight to copy from virtual cursor.
Change this back when it no longer interferes.Rajiv
----- Original Message -----
From: Annette Carr <amca...@verizon.net>
To: jaws-users-list@jaws-users.com
Sent: Sun, 15 Mar 2015 08:56:57 -0400 (EDT)
Subject: Re: [JAWS-Users] copy, pasting and i.e. 11 using jfw 16
I've had the same problem with JAWS14 and IE10 as well as JAWS16 and IE11.
I'm guessing that it has to do with a setting in how JAWS captures info from
a webpage when you are copying. Hopefully someone else can provide accurate
information about this.
Annette
-----Original Message-----
From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On
Behalf Of Kimsan
Sent: Sunday, March 15, 2015 2:58 AM
To: jaws-users
Subject: [JAWS-Users] copy, pasting and i.e. 11 using jfw 16
Hello folks:
I've just noticed something very strange.
I was on this site reading about chris brown and I attempted to copy and
paste information from the site over to word 2013.
However, when doing so, instead of the line I selected, the entire page was
selected after pasting it.
So. after doing shift down arrow, or even shift control right arrow, after
pasting it, instead of words and the sentences I copied, the entire page
ended up in word. This is using jfw 16, i.e. 11. However, when switching
over to jfw 15, everything worked as advertised. The lines I selected
appeared in the word document, instead of the entire page. What is going on
with text selection and pasting with jfw 16? Why did it work in 15 but went
wonky with 16. I assume it's just me and not anyone else but very weird.
Thoughts?
Thank you!
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
For answers to frequently asked questions about this list visit:
http://www.jaws-users.com/help/
