With outlook 2016, the two comboboxes David spoke of in his message jaws does not read. Next tab you will see/hear; New messages, none, you need to arrow to select your newly created named signature. Again tab to the reply/forward, and repeat and select the newly named signature.
If anyone uses 2016 outlook, can you confirm? Kimsan Song [email protected] -----Original Message----- From: JAWS-Users-List [mailto:[email protected]] On Behalf Of Mike B. Sent: Sunday, July 17, 2016 9:32 PM To: Jaws-Users List <[email protected]> Subject: [JAWS-Users] Signatures, How To Create 1 In Outlook 2010 From: David Hello There; to create a signature in outlook2010, Do the following; 1, open outlook2010, 2, alt+f=file, Up-arrow and enter on options. 3, now down-arrow you will hear/see mail, Just tab and enter on signatures.... 4, you need to tab and enter on new, Here you're being asked to name the signature, So type in a name. And then tab okay. 5, now you tab you will see/hear; Email account, Next tab you will see/hear; New messages, none, you need to arrow to select your newly created named signature. Again tab to the reply/forward, and repeat and select the newly named signature. 6, now tab until you hear; Edit signature, Here you type the preferred text, Now tab okay and press enter. Try doing a test email to yourself you should see the newly created signature on the bottom of your message. Hope this helps. David Take care. Mike Sent from my iBarstool. Go Dodgers! For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
