Hi, I would do a repair on Jaws and see if that correct the issue. If you do a repair and you can read the information then problem solved. If Jaws does have a problem with reading this box you might have other issues you do not so what Jaws might not be reading. So this is why I recommend you do a Jaws repair and see if it reads the box in question after the repair. Mr. Ed
-----Original Message----- From: JAWS-Users-List [mailto:[email protected]] On Behalf Of Justin Williams Sent: Wednesday, December 07, 2016 7:33 AM To: [email protected] Subject: Re: [JAWS-Users] user account settings in windows 10 Maybe just try pressing alt y and see if that works. You should be able to read it, so I'm also curious as to what is happening. Justin -----Original Message----- From: JAWS-Users-List [mailto:[email protected]] On Behalf Of Jean Menzies Sent: Tuesday, December 6, 2016 7:43 PM To: [email protected] Subject: Re: [JAWS-Users] user account settings in windows 10 All good info, but I used to be able to actually read this window. Now the whole window is blank so far as Jaws is concerned. I can read it with the built-in OCR. I can use the various keystrokes, or some of them, that everyone has mentioned. But Jaws doesn't read the controls as I tab in this window. Just wondering why. Jean -----Original Message----- From: Gene Warner Sent: Tuesday, December 6, 2016 3:52 PM To: [email protected] Subject: Re: [JAWS-Users] user account settings in windows 10 Hi Jean! I usually use Alt+Y to answer yes, or Alt+N to answer no. hth Cheers! On 12/6/2016 6:15 PM, [email protected] wrote: > Jean: I normally use the tab key. I am using JAWS 17, with Windows 10. > Am not certain if this will have any difference on your situation or not. > Jerry > > -----Original Message----- From: Jean Menzies > Sent: Tuesday, December 6, 2016 4:42 PM > To: JawsUsersList > Subject: [JAWS-Users] user account settings in windows 10 > > Using Jaws 18 and Windows 10. When I run a program to install > updates, such as when installing Jaws updates, I get the typical pop > up message window that says something like 'Do you want to allow the > following program to make changes ... > > Yes, I want that message. I hear it, but I can’t navigate to the > window to choose yes. I can do it with NVDA. I used to be able to do > it with Jaws, but for a while now I haven’t been able to do it. I > don’t know if I have turned something off or what. Any ideas how to get this > back? > > Jean > For answers to frequently asked questions about this list visit: > http://www.jaws-users.com/help/ > > For answers to frequently asked questions about this list visit: > http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
