Hi, actually you haven't your transferred object code activated at all since no CATALOG command was issued, am I right?
So the problem is in your older code that has to be revised. > F.FT.COMMISSION.TYPE as this table is used as check file in our local > template How exactly you do that? VK On Mar 15, 6:50 am, Ahmed Ali Nisar <[email protected]> wrote: > Dear VK, > Well i think you may be right that there may be a corruption of binary > data but there is one thing that I didn't initialize or used the variable > F.FT.COMMISSION.TYPE as this table is used as check file in our local > template and normally there will be no CALL OPFs to the tables which were > used as check file so how system is looking for these variables does they > were generated at compile time if so than they have to be the part of object > code ..... > > > > > > > > > > On Mon, Mar 14, 2011 at 12:04 PM, VK <[email protected]> wrote: > > Hi, > > > there are 2 problems at the same time. > > > 1) You use DL to transfer the object code. It might be that mechanism > > of saving/restoring "normal" records (which it was designed to do) > > corrupts binary data. Most probably it does. > > > Solution: use BUILD.CONTROL (IIRC the name) instead of DL or - which > > is better - copy object code manually and CATALOG it to be sure that > > another "tool" doesn't fool you :))) - as it was suggested above. > > > 2) the error message on your screen says the truth: there's no such > > record as "F.FT.COMMISSION.TYPE" in FILE.CONTROL application, but > > there is "FT.COMMISSION.TYPE". > > > Solution: Look at the code calling OPF to see where redundant "F." > > prefix appears. > > > VK > > > On Mar 13, 5:50 pm, Srinivas <[email protected]> wrote: > > > Hi, > > > > There is a problem with File Initialisation Variables in your local code. > > > > Regards, > > > > Srinivas. > > > > On 12 March 2011 21:40, Sudhakar-"Dare to Bare" <[email protected] > > >wrote: > > > > > Hi, > > > > > Normally after releasing the DL package in an environment the routines > > in > > > > the DL package will be copied to DL.BP of the environment. We have to > > move > > > > the routines to corresponding Jbase directory and CATALOG it. Make sure > > you > > > > do this step and then check the jshow of the routines. > > > > > Regards, > > > > Sudhakar > > > > > On Sat, Mar 12, 2011 at 3:16 PM, Sastry <[email protected]> > > wrote: > > > > >> Dear, > > > > >> it seems that the OPF used in the check routine has been given with > > wrong > > > >> values check your local code. > > > >> Which is using this OPF has used correct values or not. > > > > >> and after releasing the DL pack check your local routines jshow to > > confimr > > > >> whether the libs got properly updated or not. > > > > >> Regards, > > > >> SASTRY > > > >> On Sat, Mar 12, 2011 at 12:02 PM, Ahmed Ali Nisar < > > [email protected]>wrote: > > > > >>> Dear All, > > > >>> We have done some local development in T24 Ro7, and we just don't > > want > > > >>> to put code on our production so we made > > > >>> DL by using the Object code files rather than routines itself. > > > >>> After restoring the DL to the other end our Local Template(s) > > causing > > > >>> problems in validating and in check files field. > > > >>> Please help in achieving this task successfully. Screen shot is also > > > >>> attached for reference. > > > > >>> -- > > > >>> Ahmed Ali Nisar > > > > >>> -- > > > >>> Please read the posting guidelines at: > > > >>>http://groups.google.com/group/jBASE/web/Posting%20Guidelines > > > > >>> IMPORTANT: Type T24: at the start of the subject line for questions > > > >>> specific to Globus/T24 > > > > >>> To post, send email to [email protected] > > > >>> To unsubscribe, send email to [email protected] > > > >>> For more options, visit this group at > > > >>>http://groups.google.com/group/jBASE?hl=en > > > > >> -- > > > >> Please read the posting guidelines at: > > > >>http://groups.google.com/group/jBASE/web/Posting%20Guidelines > > > > >> IMPORTANT: Type T24: at the start of the subject line for questions > > > >> specific to Globus/T24 > > > > >> To post, send email to [email protected] > > > >> To unsubscribe, send email to [email protected] > > > >> For more options, visit this group at > > > >>http://groups.google.com/group/jBASE?hl=en > > > > > -- > > > > Please read the posting guidelines at: > > > >http://groups.google.com/group/jBASE/web/Posting%20Guidelines > > > > > IMPORTANT: Type T24: at the start of the subject line for questions > > > > specific to Globus/T24 > > > > > To post, send email to [email protected] > > > > To unsubscribe, send email to [email protected] > > > > For more options, visit this group at > > > >http://groups.google.com/group/jBASE?hl=en > > > > -- > > > Regards, > > > > SrinivasYadav. G > > > Mobile No: 00966 - 540625165 > > > -- > > Please read the posting guidelines at: > >http://groups.google.com/group/jBASE/web/Posting%20Guidelines > > > IMPORTANT: Type T24: at the start of the subject line for questions > > specific to Globus/T24 > > > To post, send email to [email protected] > > To unsubscribe, send email to [email protected] > > For more options, visit this group at > >http://groups.google.com/group/jBASE?hl=en > > -- > Ahmed Ali Nisar -- Please read the posting guidelines at: http://groups.google.com/group/jBASE/web/Posting%20Guidelines IMPORTANT: Type T24: at the start of the subject line for questions specific to Globus/T24 To post, send email to [email protected] To unsubscribe, send email to [email protected] For more options, visit this group at http://groups.google.com/group/jBASE?hl=en
