Charlie: Just had a thought. Try the Vista Drivers. This is what I had to do to get my audio working on a Dell computer that does not support Windows 7
Dave From: David Grenfell Sent: Sunday, March 30, 2014 11:27 AM To: [email protected] Subject: Re: [OT] Need Lexmark 6150 Multifunction Printer Software Charlie: Aren’t forced upgrades delightful ? I have been using and hp deskjet f-4180 scan/print/fax for a number of years now essentially just for scanning. I bought it with a laptop a few years ago for $49. You might be able to find one of these on ebay. I am using a Brother laser to do all my printing including output from my jBase. I think it was about $249 new, but again you might be able to get one from ebay. I am still using my hp-III drivers for all my jb output. I have found that if the printer can no longer keep up the the OS, then it is not worth your time to try to find a patched solution. Dave From: Charlie Noah Sent: Saturday, March 29, 2014 7:09 PM To: Jbase Google Group Subject: [OT] Need Lexmark 6150 Multifunction Printer Software Hey folks, I have another somewhat OT need. My wife and I both have Lexmark 6150 multifunction printers. We use both the printing and scanning functions. Copying is internal to the printer, so that still works, and we don't need the fax capability (we have an internet solution for that so long as we can scan documents). I don't even remember what the 5th function is, so we probably don't need it. The problem is that I have moved to Win7 32 bit, and my wife will very soon. Our printers aren't supported by Win7 and there are no drivers available. Mine will print fairly well, but the print jobs won't close. The multifunction software which came with the printers and is needed for the scanner will not work on Win7. These printers work fine, and we hate to just dispose of them, because of the environmental impact (even recycling - it's good to be green), and because we just can't afford to buy new printers. To get the functions we need will cost somewhere between $60-$150 each. $60 is very low-end. We are both disabled and have very minimal income. Does anyone out there know of any software to enable the scanning function, and/or a driver that will make the printer work better? Thanks, Charlie -- -- IMPORTANT: T24/Globus posts are no longer accepted on this forum. To post, send email to [email protected] To unsubscribe, send email to [email protected] For more options, visit this group at http://groups.google.com/group/jBASE?hl=en --- You received this message because you are subscribed to the Google Groups "jBASE" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. -- -- IMPORTANT: T24/Globus posts are no longer accepted on this forum. To post, send email to [email protected] To unsubscribe, send email to [email protected] For more options, visit this group at http://groups.google.com/group/jBASE?hl=en --- You received this message because you are subscribed to the Google Groups "jBASE" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. -- -- IMPORTANT: T24/Globus posts are no longer accepted on this forum. To post, send email to [email protected] To unsubscribe, send email to [email protected] For more options, visit this group at http://groups.google.com/group/jBASE?hl=en --- You received this message because you are subscribed to the Google Groups "jBASE" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
