Hi all! This is an annoying issue that I thought I'd finally ask about since it's not going to fix itself! :)
On D3 every phantom process I had previously started would start back up after a system reboot. I never had to worry about whether or not there was a power failure or someone tripped on the power cord. I have several phantoms whose only purpose is to check and make sure the other phantoms are running...but of course THEY don't start either so I remain ignorant :) With jBASE, not only do I not have the functionality of choosing when processes kick off (between certain times and on certain days, etc.), but when the PC is restarted, the processes don't start back up automatically. I have a proc in the MD that I run manually at TCL (JSH prompt) that does all the necessary PH-START commands, but is there any way to get it to run after a system reboot (or some other way to kick them off again)? Just seems strange that jBASE forgets all about the phantoms and starts fresh with each reboot? I guess I've got to stop compiling lists of all the things D3 does that jBASE doesn't - HA! :) -Greg -- -- IMPORTANT: T24/Globus posts are no longer accepted on this forum. To post, send email to [email protected] To unsubscribe, send email to [email protected] For more options, visit this group at http://groups.google.com/group/jBASE?hl=en --- You received this message because you are subscribed to the Google Groups "jBASE" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jbase/21dbde52-866d-48fa-8287-aee125fc8e37%40googlegroups.com.
