hi chris! To run jabber on HPUX, I had to configure and compile PTH as follows...
In the pth-1.3.7 (or whatever version of pth ur using) run: ./configure --with-mctx-mth=sjlj --with-mctx-dsp=sjlj --with-mctx-stk=sas --enable-pthread Then you can 'make' the pth library. I was having the very same problems as you guys describe below. get/set/swapcontext() look to be causing the problem. By using the following switches above, you use sigsetjmp/siglongjump, etc instead, which works for me (HPUX 11.00) PS - You probably dont need the --enable-thread switch above hope this works for you james -----Original Message----- From: MacNamara, Chris [mailto:[EMAIL PROTECTED]] Sent: Monday, October 15, 2001 3:01 PM To: [EMAIL PROTECTED] Subject: [JDEV] Re: Building jabberd on hp-ux I have the exact same problem. I was hoping that you have found a solution. Chris. >Thanks Doug, > I tried it and it seems to be hanging > at pth_yield(NULL) in mio_init in mio.c > > I think this is a pth problem. > I tried the pth test program test_httpd. > As you said, it hangs; some problem with pth on hpux. > Need to find a solution for this. > If I come across any solution, I'll let you know. > >Thanks, >Seeniraj -----Original Message----- From: Doug Claar [mailto:[EMAIL PROTECTED]] Sent: Monday, September 17, 2001 10:11 AM To: [EMAIL PROTECTED] Subject: [JDEV] Re: Building jabberd on hp-ux The problem I ran into on hp-ux was not the jabber server itself, but rather the posix threads package. It compiles fine, but it just hangs when called. If you actually try running the test suite for the pth package, you end up with a process running that chews up all your CPU until you kill -9 it. Don't know if that's the case if you call it from jabber, but you might check... I got busy, so I wasn't able to resolve the pth problem... ==Doug Claar _______________________________________________ jdev mailing list [EMAIL PROTECTED] http://mailman.jabber.org/listinfo/jdev This e-mail and any attachment is for authorised use by the intended recipient(s) only. It may contain proprietary material, confidential information and/or be subject to legal privilege. It should not be copied, disclosed to, retained or used by, any other party. If you are not an intended recipient then please promptly delete this e-mail and any attachment and all copies and inform the sender. Thank you. _______________________________________________ jdev mailing list [EMAIL PROTECTED] http://mailman.jabber.org/listinfo/jdev This e-mail and any attachment is for authorised use by the intended recipient(s) only. It may contain proprietary material, confidential information and/or be subject to legal privilege. It should not be copied, disclosed to, retained or used by, any other party. If you are not an intended recipient then please promptly delete this e-mail and any attachment and all copies and inform the sender. Thank you. _______________________________________________ jdev mailing list [EMAIL PROTECTED] http://mailman.jabber.org/listinfo/jdev
