Ok let me check, thanks for the advice regards Somshekar Regards Somshekar C Kadam 9036660538
On Wed, Apr 25, 2018 at 5:06 PM, Slide <[email protected]> wrote: > Yes, you can do that, you just can't set it from a shell script. > > On Wed, Apr 25, 2018, 00:20 Somshekar C Kadam <[email protected]> > wrote: > >> Thanks Slide for the help, things are clear. >> One more doubt I have, can we not set global variable which will set that >> variable between different stages >> >> For ex consider >> once Unit test is passed >> set variable pass = true >> >> same variable will be used in QA test stage to start if pass = true, >> start QA test >> >> thanks >> Somshekar >> >> >> Regards >> Somshekar C Kadam >> 9036660538 >> >> On Fri, Apr 20, 2018 at 8:59 PM, Slide <[email protected]> wrote: >> >>> The other problem is that you are expecting state to be retained between >>> invocations of sh. >>> >>> sh 'cd /media/usb' >>> sh 'rm -rf testing' >>> sh 'mkdir testing' >>> sh 'cd testing' >>> git branch: 'feature', url: '[email protected]:CelestialSyste >>> m/cyelp.git' >>> sh 'cp develop-unit/arm/ltp.sh /media/usb; chmod 777 /media/usb/ltp.sh;' >>> sh 'cp develop-unit/arm/verify.sh /media/usb; chmod 777 >>> /media/usb/verify.sh;' >>> sh '/media/usb/ltp.sh' >>> sh 'cd /media/usb' >>> sh '/media/usb/verify.sh' >>> sh 'cd /media/usb/results' >>> >>> Each call to sh is a completely separate shell script invocation, which >>> means that any cd you do will not be retained on the next invocation of sh. >>> If you want to do stuff like this, you should use one shell script >>> invocation >>> >>> # clone the code into the workspace, it will be copied later >>> git branch: 'feature', url: '[email protected]:CelestialSystem/cyelp.git' >>> >>> # run test procedure (it would be even better to put this into a shell >>> script within your code base) >>> sh """ >>> cd /media/usb >>> rm -rf testing >>> mkdir testing >>> cd testing >>> cp -r ${WORKSPACE}/cyelp ./ >>> cp develop-unit/arm/ltp.sh /media/usb; chmod 777 /media/usb/ltp.sh >>> cp develop-unit/arm/verify.sh /media/usb; chmod 777 /media/usb/verify.sh >>> /media/usb/ltp.sh >>> cd /media/usb >>> /media/usb/verify.sh >>> cd /media/usb/results >>> cp results ${WORKSPACE} >>> """ >>> # now read the output file that was copied in the shell steps above >>> output = readFile 'results' >>> >>> etc. >>> >>> >>> >>> >>> >>> On Fri, Apr 20, 2018 at 1:09 AM Somshekar C Kadam <[email protected]> >>> wrote: >>> >>>> Hi Slide, >>>> >>>> One more observation, this result file is not in workspace. that is the >>>> reason its always outputting 1 when we print the file content. >>>> This could be root cause in my understanding. >>>> I am sorry I should have mentioned this ealrier that verify script >>>> writes this file on hardisk which is not part of the workspace. >>>> I will try to add this in workspace hope as you said it should work >>>> >>>> regards >>>> Somshekar >>>> >>>> Regards >>>> Somshekar C Kadam >>>> 9036660538 <(903)%20666-0538> >>>> >>>> On Fri, Apr 20, 2018 at 10:40 AM, Somshekar C Kadam < >>>> [email protected]> wrote: >>>> >>>>> Hi Slide, >>>>> >>>>> Sorry for the delay got some personal work had to step out. >>>>> Here is the full script for test stage >>>>> Here verify script writes to "result" file 0 on success and 1 on >>>>> failure. >>>>> I am checking on the machine its value is 0, but still when i compare >>>>> value of output as mentioned by you it is till 1 >>>>> also below script block using awk gives value as 1 always. >>>>> >>>>> Any other way I need to do this. >>>>> >>>>> =============================== >>>>> >>>>> stage(‘Test’) { >>>>> agent { >>>>> label 'build' >>>>> } >>>>> environment { >>>>> res = 'pass' >>>>> qapass = 'fail' >>>>> output = '-1' >>>>> } >>>>> steps { >>>>> >>>>> sh 'cd /media/usb' >>>>> sh 'rm -rf testing' >>>>> sh 'mkdir testing' >>>>> sh 'cd testing' >>>>> git branch: 'feature', url: '[email protected]:CelestialSyste >>>>> m/cyelp.git' >>>>> sh 'cp develop-unit/arm/ltp.sh /media/usb; chmod 777 >>>>> /media/usb/ltp.sh;' >>>>> sh 'cp develop-unit/arm/verify.sh /media/usb; chmod 777 >>>>> /media/usb/verify.sh;' >>>>> sh '/media/usb/ltp.sh' >>>>> sh 'cd /media/usb' >>>>> sh '/media/usb/verify.sh' >>>>> sh 'cd /media/usb/results' >>>>> script { >>>>> output = readFile 'result' >>>>> echo "Value of outttt is $output " >>>>> if(output == "0") { >>>>> print "Unittest cases Passed" >>>>> } else { >>>>> >>>>> print "Unittest cases Failed" >>>>> } >>>>> awk '{ if ($1 == 0 ) { print "Success"; } else print "failure" }' >>>>> result >>>>> >>>>> } >>>>> >>>>> script { >>>>> sh ''' >>>>> awk '{ if ($1 == 0 ) { print "Success"; } else print "failure" }' >>>>> result >>>>> echo 'outside the script' >>>>> ''' >>>>> } >>>>> echo "$unitpass" >>>>> echo 'hey man done complete' >>>>> } >>>>> } >>>>> >>>>> >>>>> stage(‘Deploy’) { >>>>> agent { >>>>> //echo ‘Testing..’ >>>>> label 'build' >>>>> } >>>>> steps { >>>>> //echo ‘Deploying….’ >>>>> echo 'hey man done complete' >>>>> >>>>> } >>>>> } >>>>> >>>>> } >>>>> post { >>>>> >>>>> failure { >>>>> mail to: '[email protected]', >>>>> subject: "Failed Pipeline: ${currentBuild. >>>>> fullDisplayName}", >>>>> body: "Something is wrong with ${env.BUILD_URL}" >>>>> } >>>>> success { >>>>> mail to: '[email protected]', >>>>> subject: "Success Pipeline: ${currentBuild. >>>>> fullDisplayName}", >>>>> body: "Build Completed boy ${env.BUILD_URL}" >>>>> } >>>>> } >>>>> } >>>>> >>>>> =========================================================== >>>>> >>>>> thanks and regards >>>>> Somshekar >>>>> On Thu, 19 Apr 2018 19:39 Slide, <[email protected]> wrote: >>>>> >>>>>> Post your full script >>>>>> >>>>>> On Thu, Apr 19, 2018, 06:52 Somshekar C Kadam <[email protected]> >>>>>> wrote: >>>>>> >>>>>>> Hi Slide, >>>>>>> >>>>>>> I meant always the result file has 0, using above readfile when I >>>>>>> compare in if cond it always says 1, I have even echoed tha value its >>>>>>> shows >>>>>>> 1, not sure why >>>>>>> >>>>>>> regards >>>>>>> Somshekar >>>>>>> >>>>>>> Regards >>>>>>> Somshekar C Kadam >>>>>>> 9036660538 <(903)%20666-0538> >>>>>>> >>>>>>> On Thu, Apr 19, 2018 at 7:21 PM, Somshekar C Kadam < >>>>>>> [email protected]> wrote: >>>>>>> >>>>>>>> Hi Slide, >>>>>>>> >>>>>>>> Thanks for the inputs. >>>>>>>> I did check the value of output its returning always 1, actually it >>>>>>>> has value 0. not sure why? >>>>>>>> >>>>>>>> one more clarification can we call awk in script { } block ? >>>>>>>> >>>>>>>> regards >>>>>>>> Somshekar >>>>>>>> >>>>>>>> >>>>>>>> Regards >>>>>>>> Somshekar C Kadam >>>>>>>> 9036660538 <(903)%20666-0538> >>>>>>>> >>>>>>>> On Thu, Apr 19, 2018 at 7:12 PM, Slide <[email protected]> >>>>>>>> wrote: >>>>>>>> >>>>>>>>> Ok, then my suggestion is fine, after readFile, the variable >>>>>>>>> output has the value, so just use an if check directly in the script >>>>>>>>> block >>>>>>>>> of the pipeline. script blocks are groovy scripts, so you can use >>>>>>>>> most of >>>>>>>>> the functionality of groovy to do what you want. >>>>>>>>> >>>>>>>>> On Thu, Apr 19, 2018 at 6:24 AM Somshekar C Kadam < >>>>>>>>> [email protected]> wrote: >>>>>>>>> >>>>>>>>>> Hi Slide, >>>>>>>>>> >>>>>>>>>> You got it right. >>>>>>>>>> >>>>>>>>>> result file contains either 0 or 1 as a unittest pass or fail. >>>>>>>>>> I need to read this file which contains 0 or 1 and proceed next >>>>>>>>>> stage. >>>>>>>>>> >>>>>>>>>> thanks in advance >>>>>>>>>> regards >>>>>>>>>> Somshekar >>>>>>>>>> >>>>>>>>>> Regards >>>>>>>>>> Somshekar C Kadam >>>>>>>>>> 9036660538 <(903)%20666-0538> >>>>>>>>>> >>>>>>>>>> On Thu, Apr 19, 2018 at 6:52 PM, Slide <[email protected]> >>>>>>>>>> wrote: >>>>>>>>>> >>>>>>>>>>> Well, it depends on what you are expecting to happen with these >>>>>>>>>>> lines: >>>>>>>>>>> >>>>>>>>>>> awk '{ if ($1 == 0 ) { $res = "passed" } else $res = "fail" }' >>>>>>>>>>> result >>>>>>>>>>> >>>>>>>>>>> awk '{ if ($1 == 0 ) { print "Success"; } else print "failure" >>>>>>>>>>> }' result >>>>>>>>>>> >>>>>>>>>>> The shell scripts don't take parameters, so what are you >>>>>>>>>>> expecting to be in $1? What does the variable output contain? Will >>>>>>>>>>> it >>>>>>>>>>> contain the 0 or other exit code? If so, just use an if statement >>>>>>>>>>> in the >>>>>>>>>>> script {} block to check the value >>>>>>>>>>> >>>>>>>>>>> script { >>>>>>>>>>> ... >>>>>>>>>>> output = readFile 'result' >>>>>>>>>>> if(output == "0") { >>>>>>>>>>> >>>>>>>>>>> } else { >>>>>>>>>>> >>>>>>>>>>> } >>>>>>>>>>> >>>>>>>>>>> } >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On Thu, Apr 19, 2018 at 6:15 AM Somshekar C Kadam < >>>>>>>>>>> [email protected]> wrote: >>>>>>>>>>> >>>>>>>>>>>> Hi Slide, >>>>>>>>>>>> >>>>>>>>>>>> First of thanks for the response. Ok understood >>>>>>>>>>>> Am not finding any documentation to do the same in >>>>>>>>>>>> jjenkinsfile. >>>>>>>>>>>> Please can you point to it or any example will help >>>>>>>>>>>> >>>>>>>>>>>> regards >>>>>>>>>>>> Somshekar >>>>>>>>>>>> >>>>>>>>>>>> Regards >>>>>>>>>>>> Somshekar C Kadam >>>>>>>>>>>> 9036660538 <(903)%20666-0538> >>>>>>>>>>>> >>>>>>>>>>>> On Thu, Apr 19, 2018 at 6:39 PM, Slide <[email protected]> >>>>>>>>>>>> wrote: >>>>>>>>>>>> >>>>>>>>>>>>> You can't set res inside a shell script and have it set in the >>>>>>>>>>>>> pipeline. It seems like you are trying to use shell scripts to do >>>>>>>>>>>>> things >>>>>>>>>>>>> that could be done directly in the Jenkinsfile as well. Is there >>>>>>>>>>>>> a reason >>>>>>>>>>>>> you are using shell scripts for that? >>>>>>>>>>>>> >>>>>>>>>>>>> On Thu, Apr 19, 2018 at 1:41 AM Somshekar < >>>>>>>>>>>>> [email protected]> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>>> Hi All, >>>>>>>>>>>>>> >>>>>>>>>>>>>> I am trying to change the value of string dependign upon the >>>>>>>>>>>>>> unittest cases passed by reading a file. >>>>>>>>>>>>>> For next stage to proceed I want to set the string depending >>>>>>>>>>>>>> upon the value next stage qa or other stage can proceed. >>>>>>>>>>>>>> but not able to change value f string in jenkins file. >>>>>>>>>>>>>> >>>>>>>>>>>>>> value of res is not changing at all >>>>>>>>>>>>>> >>>>>>>>>>>>>> also to verify I have added one more script block belwo it to >>>>>>>>>>>>>> verify if able to read file proerly and its value, its working >>>>>>>>>>>>>> fine. below >>>>>>>>>>>>>> its printing failure as value is set to 1 in result file. >>>>>>>>>>>>>> >>>>>>>>>>>>>> not sure on this, please let me know possible solution thanks >>>>>>>>>>>>>> in advance >>>>>>>>>>>>>> >>>>>>>>>>>>>> ===================== >>>>>>>>>>>>>> environment { >>>>>>>>>>>>>> res = 'pass' >>>>>>>>>>>>>> qapass = 'fail' >>>>>>>>>>>>>> output = '-1' >>>>>>>>>>>>>> } >>>>>>>>>>>>>> >>>>>>>>>>>>>> .... >>>>>>>>>>>>>> .... >>>>>>>>>>>>>> >>>>>>>>>>>>>> script { >>>>>>>>>>>>>> output = readFile 'result' >>>>>>>>>>>>>> echo "Value of output is $output" >>>>>>>>>>>>>> echo 'inside the script' >>>>>>>>>>>>>> sh ''' >>>>>>>>>>>>>> awk '{ if ($1 == 0 ) { $res = >>>>>>>>>>>>>> "passed" } else $res = "fail" }' result >>>>>>>>>>>>>> echo 'outside the script' >>>>>>>>>>>>>> echo "value is $res" >>>>>>>>>>>>>> ''' >>>>>>>>>>>>>> } >>>>>>>>>>>>>> script { >>>>>>>>>>>>>> sh ''' >>>>>>>>>>>>>> awk '{ if ($1 == 0 ) { print >>>>>>>>>>>>>> "Success"; } else print "failure" }' result >>>>>>>>>>>>>> echo 'outside the script' >>>>>>>>>>>>>> ''' >>>>>>>>>>>>>> } >>>>>>>>>>>>>> >>>>>>>>>>>>>> ========================== >>>>>>>>>>>>>> >>>>>>>>>>>>>> -- >>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>>> Google Groups "Jenkins Users" group. >>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>>>> it, send an email to jenkinsci-users+unsubscribe@ >>>>>>>>>>>>>> googlegroups.com. >>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>> https://groups.google.com/d/msgid/jenkinsci-users/ >>>>>>>>>>>>>> 8b5e5fd5-8e6f-486f-aa54-f5bc97aa1f03%40googlegroups.com >>>>>>>>>>>>>> <https://groups.google.com/d/msgid/jenkinsci-users/8b5e5fd5-8e6f-486f-aa54-f5bc97aa1f03%40googlegroups.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>>>> . >>>>>>>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>> Google Groups "Jenkins Users" group. >>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>>> it, send an email to jenkinsci-users+unsubscribe@ >>>>>>>>>>>>> googlegroups.com. >>>>>>>>>>>>> >>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>> https://groups.google.com/d/msgid/jenkinsci-users/ >>>>>>>>>>>>> CAPiUgVfvD%3DhiFmw2-RcTZhAV%3D0UAfX1VGMYdG%2B4% >>>>>>>>>>>>> 2BNyMq5rNp4Q%40mail.gmail.com >>>>>>>>>>>>> <https://groups.google.com/d/msgid/jenkinsci-users/CAPiUgVfvD%3DhiFmw2-RcTZhAV%3D0UAfX1VGMYdG%2B4%2BNyMq5rNp4Q%40mail.gmail.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>>> . >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>> Google Groups "Jenkins Users" group. >>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>> it, send an email to jenkinsci-users+unsubscribe@ >>>>>>>>>>>> googlegroups.com. >>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>> https://groups.google.com/d/msgid/jenkinsci-users/CALbGK-q3d- >>>>>>>>>>>> 9vOVGcviqS6JqnKU0U669ey7Dw7irVkZNL7XSqoQ%40mail.gmail.com >>>>>>>>>>>> <https://groups.google.com/d/msgid/jenkinsci-users/CALbGK-q3d-9vOVGcviqS6JqnKU0U669ey7Dw7irVkZNL7XSqoQ%40mail.gmail.com?utm_medium=email&utm_source=footer> >>>>>>>>>>>> . >>>>>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>> Google Groups "Jenkins Users" group. >>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>> it, send an email to jenkinsci-users+unsubscribe@ >>>>>>>>>>> googlegroups.com. >>>>>>>>>>> >>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>> https://groups.google.com/d/msgid/jenkinsci-users/ >>>>>>>>>>> CAPiUgVfz8KEM9KS7Q2VP5RAai0%3D6KY1Dbig_1mvTs1T6wDNa1A% >>>>>>>>>>> 40mail.gmail.com >>>>>>>>>>> <https://groups.google.com/d/msgid/jenkinsci-users/CAPiUgVfz8KEM9KS7Q2VP5RAai0%3D6KY1Dbig_1mvTs1T6wDNa1A%40mail.gmail.com?utm_medium=email&utm_source=footer> >>>>>>>>>>> . >>>>>>>>>> >>>>>>>>>> >>>>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>> Google Groups "Jenkins Users" group. >>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>> send an email to [email protected]. >>>>>>>>>> To view this discussion on the web visit >>>>>>>>>> https://groups.google.com/d/msgid/jenkinsci-users/CALbGK- >>>>>>>>>> ps-XRJaG-R7jsPC-%2BbD3nZu4NJEpkJYsyA_cCT5rgrBA%40mail.gmail.com >>>>>>>>>> <https://groups.google.com/d/msgid/jenkinsci-users/CALbGK-ps-XRJaG-R7jsPC-%2BbD3nZu4NJEpkJYsyA_cCT5rgrBA%40mail.gmail.com?utm_medium=email&utm_source=footer> >>>>>>>>>> . >>>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>>>> >>>>>>>>> -- >>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>> Groups "Jenkins Users" group. >>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>> send an email to [email protected]. >>>>>>>>> To view this discussion on the web visit >>>>>>>>> https://groups.google.com/d/msgid/jenkinsci-users/ >>>>>>>>> CAPiUgVdy-67daooVFrLtk-wgtCt6YpJzCtGWREGK7ucBXcxq5Q% >>>>>>>>> 40mail.gmail.com >>>>>>>>> <https://groups.google.com/d/msgid/jenkinsci-users/CAPiUgVdy-67daooVFrLtk-wgtCt6YpJzCtGWREGK7ucBXcxq5Q%40mail.gmail.com?utm_medium=email&utm_source=footer> >>>>>>>>> . >>>>>>>>> >>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "Jenkins Users" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to [email protected]. >>>>>>> To view this discussion on the web visit >>>>>>> https://groups.google.com/d/msgid/jenkinsci-users/CALbGK-q3% >>>>>>> 2BJrJFqpa6e6hAN4XYLfrnGvCbttpuR1_GXtrTjjdBQ%40mail.gmail.com >>>>>>> <https://groups.google.com/d/msgid/jenkinsci-users/CALbGK-q3%2BJrJFqpa6e6hAN4XYLfrnGvCbttpuR1_GXtrTjjdBQ%40mail.gmail.com?utm_medium=email&utm_source=footer> >>>>>>> . >>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>> >>>>>> -- >>>>>> You received this message because you are subscribed to the Google >>>>>> Groups "Jenkins Users" group. >>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>> send an email to [email protected]. >>>>>> To view this discussion on the web visit https://groups.google.com/d/ >>>>>> msgid/jenkinsci-users/CAPiUgVf%2Bj2gU6-9PKh1yTPSmGGvvSLDNsCcCGD6OHQh5 >>>>>> eJHbtw%40mail.gmail.com >>>>>> <https://groups.google.com/d/msgid/jenkinsci-users/CAPiUgVf%2Bj2gU6-9PKh1yTPSmGGvvSLDNsCcCGD6OHQh5eJHbtw%40mail.gmail.com?utm_medium=email&utm_source=footer> >>>>>> . >>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>> >>>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "Jenkins Users" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> To view this discussion on the web visit https://groups.google.com/d/ >>>> msgid/jenkinsci-users/CALbGK-rASCLkiROwHKAkAb- >>>> eRRqP4CictgPAjiscsrdF4PHAzA%40mail.gmail.com >>>> <https://groups.google.com/d/msgid/jenkinsci-users/CALbGK-rASCLkiROwHKAkAb-eRRqP4CictgPAjiscsrdF4PHAzA%40mail.gmail.com?utm_medium=email&utm_source=footer> >>>> . >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Jenkins Users" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> >> To view this discussion on the web visit https://groups.google.com/d/ >>> msgid/jenkinsci-users/CAPiUgVcM68Dy1ZXF0SoNkGmU% >>> 2BwGnyBnhbLnNk7czjSj1B3tfbA%40mail.gmail.com >>> <https://groups.google.com/d/msgid/jenkinsci-users/CAPiUgVcM68Dy1ZXF0SoNkGmU%2BwGnyBnhbLnNk7czjSj1B3tfbA%40mail.gmail.com?utm_medium=email&utm_source=footer> >>> . >> >> >>> For more options, visit https://groups.google.com/d/optout. >>> >> -- >> You received this message because you are subscribed to the Google Groups >> "Jenkins Users" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected]. >> To view this discussion on the web visit https://groups.google.com/d/ >> msgid/jenkinsci-users/CALbGK-owxV0ssqbozZMwwTGLpKo_b_0Tc_ >> TUjuNJnE%3DDNoBj_w%40mail.gmail.com >> <https://groups.google.com/d/msgid/jenkinsci-users/CALbGK-owxV0ssqbozZMwwTGLpKo_b_0Tc_TUjuNJnE%3DDNoBj_w%40mail.gmail.com?utm_medium=email&utm_source=footer> >> . >> For more options, visit https://groups.google.com/d/optout. >> > -- > You received this message because you are subscribed to the Google Groups > "Jenkins Users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit https://groups.google.com/d/ > msgid/jenkinsci-users/CAPiUgVcAWHZDY%2BcWcJvmY_z%2BFdhszQoo% > 3DUTzszdU02s9Up4ryQ%40mail.gmail.com > <https://groups.google.com/d/msgid/jenkinsci-users/CAPiUgVcAWHZDY%2BcWcJvmY_z%2BFdhszQoo%3DUTzszdU02s9Up4ryQ%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Jenkins Users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/jenkinsci-users/CALbGK-qWVpZ_YNxnWDpORbz65n%3D3C0%2BzK-%2B3K-Pi2bZMc8dREQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
