See the last paragraph of manual section 2.8.1.5:

  For rules in which a test CE is the first pattern on the LHS, the
  pattern (initial-fact) is inserted to become the "preceding pattern"
  for the test. The fact (initial-fact) is therefore also important for
  the proper functioning of the test conditional element; the caution
  about (reset) in the preceding section applies equally to test.


I think Yanguo Jing wrote:
[Charset iso-8859-1 unsupported, filtering to ASCII...]
> Thanks, Ernest
> 
> Apparently u r right. But what I really need is whenever the variable ?x >=
> 0.9, printout "x is bigger than 0.9". According to the manual, "a test CE is
> evaluated everytime the preceding pattern on the rule's LHS is evaluated",
> then how about the rule shown below, it has no preceding pattern on the
> rule's LHS?
> 
> (defrule a1 (test (> ?*x* 0.9))  => (printout t "x is bigger than 0.9"
> crlf))
> 
> Do I have to add a pattern in front of test CE shown below to change patten
> (a) to invoke the test CE.
> 
> (defrule a1 (a) (test (> ?*x* 0.9))  => (printout t "x is bigger than  0.9"
> crlf))
> 
> Thanks!
> 
> -Yanguo
> 
> 
> 
> 
> >
> >
> > I think Yanguo Jing wrote:
> > [Charset iso-8859-1 unsupported, filtering to ASCII...]
> > > Sorry Ernest, I send it to you by mistake.
> > >
> > > Dear all
> > >
> > > I wrote the following code, why it always said rule a1 have a mistake.
> But I
> > > can NOT find it?
> > >
> > > (defrule a0 =>(assert (a)) (bind ?x 0.91))
> > > (defrule a1 (a) (test (> ?x 0.9))  => (printout t "x is bigger than 0.9"
> > > crlf ) )
> >
> >
> > This rule tests a variable ?x, but no variable ?x is defined on the
> > left-hand-side of rule a1. Variables like ?x are local to the rule in
> > which they are defined.
> >
> > If you want global variables, use a defglobal:
> >
> >
> > (defglobal ?*x* = 0)
> > (defrule a0 =>(assert (a)) (bind ?*x* 0.91))
> > (defrule a1 (a) (test (> ?*x* 0.9))  => (printout t "x is bigger than
> > 0.9" crlf))
> >
> >
> > > (reset)
> > > (run)
> > >
> > > Thanks!!
> > >
> > > Yanguo Jing
> > > Intelligent System Laboratory
> > > Department of Computing and Electrical Engineering,
> > > Heriot-Watt University, Edinburgh, UK
> > > EH14 4AS
> > > Tel: +44 (0)131 449  5111 Ext. 4164
> > > Fax: +44 (0)131 451 3327
> > >
> > >
> > >
> > >
> > > ---------------------------------------------------------------------
> > > To unsubscribe, send the words 'unsubscribe jess-users [EMAIL PROTECTED]'
> > > in the BODY of a message to [EMAIL PROTECTED], NOT to the
> > > list (use your own address!) List problems? Notify
> [EMAIL PROTECTED]
> > > ---------------------------------------------------------------------
> > >
> >
> >
> >
> > ---------------------------------------------------------
> > Ernest Friedman-Hill
> > Distributed Systems Research        Phone: (925) 294-2154
> > Sandia National Labs                FAX:   (925) 294-2234
> > Org. 8920, MS 9012                  [EMAIL PROTECTED]
> > PO Box 969                  http://herzberg.ca.sandia.gov
> > Livermore, CA 94550
> 
> 
> ---------------------------------------------------------------------
> To unsubscribe, send the words 'unsubscribe jess-users [EMAIL PROTECTED]'
> in the BODY of a message to [EMAIL PROTECTED], NOT to the
> list (use your own address!) List problems? Notify [EMAIL PROTECTED]
> ---------------------------------------------------------------------
> 



---------------------------------------------------------
Ernest Friedman-Hill  
Distributed Systems Research        Phone: (925) 294-2154
Sandia National Labs                FAX:   (925) 294-2234
Org. 8920, MS 9012                  [EMAIL PROTECTED]
PO Box 969                  http://herzberg.ca.sandia.gov
Livermore, CA 94550

---------------------------------------------------------------------
To unsubscribe, send the words 'unsubscribe jess-users [EMAIL PROTECTED]'
in the BODY of a message to [EMAIL PROTECTED], NOT to the
list (use your own address!) List problems? Notify [EMAIL PROTECTED]
---------------------------------------------------------------------

Reply via email to