On Wed, Mar 17, 2004 at 10:35:19AM +0100, Joern Westermann wrote: > I'm trying to get the RTT-graph in the "RTT & Packet Loss" graph type > filled with data. I added the interface's IP address to the "IP address" > and "Peer IP address" field but I still get a flat line on the graph. > All other graph types are working fine. > Any suggestions of what I forgot to activate?
To get that to work your switch needs to be a cisco switch and you need to have a read/write SNMP community set. The switch also needs to permit SNMP write requests from your JFFNMS computer. - Craig -- Craig Small GnuPG:1C1B D893 1418 2AF4 45EE 95CB C76C E5AC 12CA DFA5 Eye-Net Consulting http://www.enc.com.au/ MIEE Debian developer csmall at : enc.com.au ieee.org debian.org ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ jffnms-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/jffnms-users
