Johan,
We only use the default if the real IfSpeed is 0.
So please check if the router has correctly set the Bandwidth in each interface.
Also you may want to show me a snmpwalk of the IfSpeed OID against your router.
Javier
johan wrote:
Hi,
I have problem in getting the correct inbound and outbound bandwidth in
the discovering of the performance graphs. Apparently for some odd raeson he always gives
the 128000 kbps, due to a rule in snmp_interfaces.inc.php : if ($ifSpeed[$i] == 0) $ifSpeed[$i] = 128; //default Speed Value
I tried to remove it, and then he gives 56000bps as standard value. What
I want is the real inbound/outbound bandwidth, i.e. the result of
$ifSpeed = snmp_walk($ip,$rocommunity,".1.3.6.1.2.1.2.2.1.5");
Anybody know how I can fix this ?
Greetings, Johan
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com
_______________________________________________
jffnms-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/jffnms-users
-- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Javier Szyszlican, Project Leader, JFFNMS [EMAIL PROTECTED]
I hope JFFNMS or I were helpful to you, if you can, please donate at http://jffnms.org/donate
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com
_______________________________________________
jffnms-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/jffnms-users
