I think that use of engine id (snmp v3) is not supported by php-snmp and jffnms. Try a simple config like
snmp-server community <your-ro-community> RO then do a #wr mem and test your snmp with command like this from the nms server snmpget -c public <yourhost> system.sysName.0 if it doesn't work, you have to check if there is something filtering between the nms and the router. �_________________________________ David LIMA Professional Services www.scc.com � � -----Message d'origine----- De�: munawar zaidi [mailto:[EMAIL PROTECTED] Envoy�: mercredi 4 ao�t 2004 6:02 ��: LIMA David Objet�: Re: RE : [jffnms-users] interfaces hello ! sorry for the late reply.my snmp config is given below for the cisco 2620 router.it would be great help for me if u could tell me whats wron with that , and why im not getting the results ( ie- the interfaces). � access-list 1 permit any dialer-list 1 protocol ip permit dialer-list 1 protocol ipx permit snmp-server engineID local 00000009020000055EB32240 snmp-server community xtracer RO snmp-server community alianz RW snmp-server community private RO snmp-server enable traps snmp snmp-server enable traps isdn call-information snmp-server enable traps hsrp snmp-server enable traps config snmp-server enable traps entity snmp-server enable traps envmon snmp-server enable traps bgp snmp-server enable traps rsvp snmp-server enable traps frame-relay snmp-server enable traps rtr snmp-server enable traps syslog snmp-server enable traps dlsw snmp-server enable traps dial snmp-server enable traps voice poor-qov ------------------------------------------ well thanks for your interest! LIMA David <[EMAIL PROTECTED]> wrote: Another time you have a problem with snmp ..... can you show us the snmp part of the cisco config � _________________________________ David LIMA Professional Services www.scc.com � � -----Message d'origine----- De�: munawar zaidi [mailto:[EMAIL PROTECTED] Envoy�: mardi 3 ao�t 2004 9:03 ��: [EMAIL PROTECTED] Objet�: [jffnms-users] interfaces hi, i have a cisco 2620 router ,�it has four interfaces three serial interfaces (S0/0,S0/1,S0/2)�� and a fast ethernet interface (FE0) ,snmp�is�enabled .when i do manual discovery what sort of interfaces it is supposed to show me. im getting only reachable interface. thanks. Do you Yahoo!? Take Yahoo! Mail with you! Get it on your mobile phone. Do you Yahoo!? Yahoo! Mail is new and improved - Check it out! ------------------------------------------------------- This SF.Net email is sponsored by OSTG. Have you noticed the changes on Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now, one more big change to announce. We are now OSTG- Open Source Technology Group. Come see the changes on the new OSTG site. www.ostg.com _______________________________________________ jffnms-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/jffnms-users
