Hi So we've got SAA probes running on two routers to measure/simulate VoIP calls measuring delay, jitter, loss...the SAA operation is configured to run every 30 minutes. I was reading on the Cisco site regarding monitoring these values with HPOpenView or a similar system (jffnms) and it says to :
For example, if the delay and jitter probe is calculating jitter every five minutes, do not poll the MIB at any interval less than five minutes. Should I be concerned with the polling of this MIB? Will it poll at the standard 5 minute interval like the rest of the interfaces in JFFNMS, or is the setup differently? Any ideas. Thanks. -- Jason D. Humes Applied Computer Solutions Inc. 3020 St. Etienne Blvd. Windsor, Ontario Phone: (519) 944-4300 x211 Fax : (519) 944-4247 Email : [EMAIL PROTECTED] ********************************************************************** Confidentiality Notice: The information contained in this e-mail and any attachments may be legally privileged and confidential. If you are not an intended recipient, you are hereby notified that any dissemination, distribution or copying of this e-mail and any attachments is strictly prohibited. If you received this e-mail in error, please notify the sender and permanently delete the e-mail and any attachments immediately. You should not retain, copy or use this e-mail or any attachment for any purpose, nor disclose all or any part of the contents to any other person. Thank you. ------------------------------------------------------- SF.Net email is sponsored by Shop4tech.com-Lowest price on Blank Media 100pk Sonic DVD-R 4x for only $29 -100pk Sonic DVD+R for only $33 Save 50% off Retail on Ink & Toner - Free Shipping and Free Gift. http://www.shop4tech.com/z/Inkjet_Cartridges/9_108_r285 _______________________________________________ jffnms-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/jffnms-users
