> Hi David, > > Sorry about the delay. > > David Singer wrote: > > I think I got the Satellite setup right. I followed the directions from > : > > "FW: Satellite problem" > http://thread.gmane.org/gmane.network.jffnms.user/361 > > On the Master in the Satellites setup I have the following records. > > > > Desc: "Local", Parent: "(none)", Satellite URL: > > "http://masterhostaddress/jffnms/admin/satellite.php";, > > Group: "(none)", Type: "Master" > > > > This if fine. > > > Desc: "DataCenter", Parent: "Local", > > Satellite > URL:"http://datacenterhostaddress/jffnms/admin/satellite.php";, > > Group: "(none)", Type: "Satellite" > > > > This is too. > > > On the satellite server on the setup page the Satellite URI is: > > "http://datacenterhostaddress/jffnms/admin/satellite.php"; > > perfect. > > > and the value for the Satellite Server is: > > "http://masterhostaddress/jffnms/admin/satellite.php"; > > This is not ok, because this is only for the GUI. Leave it empty. I tried blanking it and it just came back up with the same thing so I put "none" in it. It still is not able to do a manual discovery w/o port scan. I then went into the config.ini and deleted "none" so that it would be blank and tried again. Still no discovery.
> > > > > On the master server on the setup page the Satellite URI is: > > "http://masterhostaddress/jffnms/admin/satellite.php"; > > Fine. > > > > > On the master I configured a host entry for the router at the location > of the > > master and it works great. > > Again on the master I then configured a host entry for the router > > (identical to > > the first) at the location of the satellite (DataCenter) and it is > having > > problems. > > I tried on the master to do a manual discovery w/o port scan of the > router at > > the datacenter. It took a couple of minutes before it came back with > nothing > > discovered. > > Can you reach the router from the master server? No. I use to be able to get snmp response through it's vpn but I pugraded the firmware on it and it will nolonger allow snmp access outside its internal subnet. Also the VPN sometimes goes down and I would like to be able to keep info on what is happening while the connection is down. > AD is not made distributed yet, so it will work locally from the server > you are > calling it. Are you saying that I need to discover the hosts interfaces from the gui on the satellite server or automagic? > > > I then configured the host record on the master for the router at > > the datacenter to use automagic. There are no interfaces for the > datacenter > > router on the master server. > > This is the same as the Manual Discovery. > > > On the satelite server I can see the > > autodiscovered/configured interfaces for the datacenter router and the > poller > > log on the satellite looks like everything should be working: > > 13:30:02 : H 5 : Possible Paths to 1... 1 > > 13:30:02 : H 5 : Testing Satellite Conexions to 1... > > 13:30:02 : H 5 : Using direct connexion to Satellite 1: > > http://masterhostaddres/jffnms/admin/satellite.php > > 13:30:02 : H 5 : Poller Start : 48 Items. > > 13:30:02 : H 5 : I 11 : P 1 : reachability_start:ping(): > 416... > > -> buffer(): (time P:23.7 | 189.54) > > 13:30:05 : H 5 : I 8 : P 10 : > tcp_status,tcp_content,conn_delay(): > > open||0.00304 -> multi_buffer(): (time P:3005.84 | 167.09) > > ... > > ... > > ... > > 13:30:28 : H 5 : I 9 : P LPD : last_poll_date(): 1097267416 -> > > db(last_poll_date): (time P:0.08 | 3994.19) > > 13:30:28 : H 5 : I 10 : P LPD : last_poll_date(): 1097267419 -> > > db(last_poll_date): (time P:0.08 | 160.64) > > 13:30:28 : H 5 : Closing Used Satellite Conexion for 1 to 1 ... > > 13:30:28 : H 5 : Poller End, Total Time: 26452.23 msec. > > > > This is the poller, and it seems to be working correctly. > > > I am using JFFNMS 0.7.9 with the latest mysql, apache etc. on both > servers. > > The connection between the servers is a ipsec vpn across the internet > between > > two router boxes (not the jffnms servers) that has a max throughput of > 1Mb > > with > > not much competition for that bandwidth. The apache config on the > master uses > > virtual name server to keep the main (default virtual server) web site > > seperated from the support website. Thats why I used a FQDN for the > satellite > > URI. > > > > Thanks in advance for the help. > > > > DS > > > > Javier > > > > > ------------------------------------------------------- > > This SF.net email is sponsored by: IT Product Guide on > ITManagersJournal > > Use IT products in your business? Tell us what you think of them. Give > us > > Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out > more > > http://productguide.itmanagersjournal.com/guidepromo.tmpl > > _______________________________________________ > > jffnms-users mailing list > > [EMAIL PROTECTED] > > https://lists.sourceforge.net/lists/listinfo/jffnms-users > > -- > =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= > Javier Szyszlican, Project Leader, JFFNMS > [EMAIL PROTECTED] > > I hope JFFNMS or I were helpful to you, if you > can, please donate at http://jffnms.org/donate > David Singer Computer/Network Engineer Northwest PACS Network Inc. (509) 529-5066 x5 Office (509) 520-0621 Cell [EMAIL PROTECTED] www.nwpacs.com ------------------------------------------------------- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl _______________________________________________ jffnms-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/jffnms-users
