Hi Craig,
You will have to code your own interface type in NMS to implement the MIB you want.
You can start by reading the Manual.
Javier
Craig Burton wrote:
Hello,
I am looking to use a Cisco NM-AIC-64 alarm module to integrate some equipment using dry relay contact alarms into our JFFNMS system.
(See http://www.cisco.com/en/US/products/hw/modules/ps2797/products_data_sheet09186a008010fd25.html for more info.)
Does anyone have experience of using these units with JFFNMS? Would JFFNMS support them natively, or will I have to integrate the OIDs manually to monitor the inputs? If so, I'm not quite sure where to start, as the specific CISCO-AIC-MIB mentioned in the docs doesn't appear to be available on Cisco's site!
Any advice on using these would be much appreciated.
Thanks,
Craig
-- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Javier Szyszlican, Project Leader, JFFNMS [EMAIL PROTECTED]
I hope JFFNMS or I were helpful to you, if you can, please donate at http://jffnms.org/donate
------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ jffnms-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/jffnms-users
