Is your JFFNMS install working under the "apache" or the "jffnms" user ?
The tftp daemon should run as the same user running the cronjobs.
Javier
Jason Humes wrote:
I was creating a file because lots of docs about config backup said to
create the file first. I do a copy run tftp and the file shows up as
expected. But when I run php tftp_get_host_config HOSTID, it fails.
This is how the created file looks;
-rw-rw-rw- 1 nobody nobody 8055 Mar 2 15:22 vlswitch254-confg
--
Jason
-----Original Message-----
From: Javier Szyszlican [mailto:[EMAIL PROTECTED] Sent: Wednesday, March 02, 2005 11:22 AM
Cc: [email protected]
Subject: Re: [jffnms-users] Not all configs transfer after upgrade to 0.8
Hi Jason,
Why would you create a a file??????
You should let the tftp daemon create it.
Do a copy run tftp from your router and check if you get a file there.
If you don't you have a TFTP server problem.
The files should be created as the jffnms user so the script can read them,
and then delete them.
Javier
Jason Humes wrote:
Hi So I've edited one of the hosts giving the error and disabled config transfer, saved, re-enabled config transfer for 12.0 or newer, and then
ran
the tftp_get_host_config ## (where ##is the host id) and I get the same error. Yet, if I manually create a file with the routers hostname in the /opt/jffnms/tftpd dir and chmod 666 it, and then do a copy run tftp, it works. How is jffnms naming its configs and how should my xinetd tftp
conf
file look? Here is mine...
service tftp { socket_type = dgram protocol = udp wait = yes user = root server = /usr/sbin/in.tftpd server_args = -c -s /opt/jffnms/tftpd disable = no
Does this look right, its almost as if its creating some files, but not others. Also, does jffnms move these configs once they are backed up? There is nothing readable in the tftpd folder. Thanks --
Jason
-----Original Message-----
From: Javier Szyszlican [mailto:[EMAIL PROTECTED] Sent: Wednesday, March 02, 2005 10:20 AM
Cc: [email protected]
Subject: Re: [jffnms-users] Not all configs transfer after upgrade to 0.8
Johan,
The only change is that it now uses our snmp_set function (wrapper for
SNMP
v1, v2 or v3)
Can you disable config transfer for that host and try again.
Javier
johan wrote:
Javier,
IN my case, he always stops at host with id nr. 60, dont know why, he never goes further. Somethinghas changed in the engine/tftp... file ?
Greetz, Johan
On Wed, 2005-03-02 at 09:55 -0500, Jason Humes wrote:
Hi So now since the upgrade to 0.8.0 some of my host configs don't backup properly. When I run the tftp script manually, so of them finish ok,
some
say error getting file and some say error waiting for transfer to
fininsh.
My tftp server is set to use /opt/jffnms/tftpd and under the system setup part of jffnms, it is set for /opt/jffnms/tftpd...yet while running this tftp script, I never see any configs in that directory. Any
ideas...Thanks
--
Jason
------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ jffnms-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/jffnms-users
-- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Javier Szyszlican, Project Leader, JFFNMS [EMAIL PROTECTED]
I hope JFFNMS or I were helpful to you, if you can, please donate at http://jffnms.org/donate
------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ jffnms-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/jffnms-users
