Hi Thomas, Can you enable the debugs in lines 57 & 64 of lib/api.rrdtool.inc.php
Then do that again. Did you save the setup config when you reinstalled rrdtool ? Javier Thomas Williams wrote: > When I run the poller directly I get this: > > [EMAIL PROTECTED] engine]$ php -q poller.php 3 > 10:42:50 : H 3 : Poller Start : 33 Items. > 10:42:53 : H 3 : I 34 : P 10 : tcp_status,tcp_content,conn_delay > (): open|220 (vsFTPd 1.1.3)|0.00122 -> multi_buffer(): 3 (time P:3003.82 > | 0.38) > 10:42:56 : H 3 : I 35 : P 10 : tcp_status,tcp_content,conn_delay > (): open|SSH-1.99-OpenSSH_3.5p1|0.00018 -> multi_buffer(): 6 (time > P:3002.29 | 0.16) > 10:42:59 : H 3 : I 36 : P 10 : tcp_status,tcp_content,conn_delay > (): open||0.0002 -> multi_buffer(): 8 (time P:3001.61 | 0.19) > 10:43:02 : H 3 : I 37 : P 10 : tcp_status,tcp_content,conn_delay > (): open||0.00018 -> multi_buffer(): 10 (time P:3002.56 | 0.2) > 10:43:05 : H 3 : I 38 : P 10 : tcp_status,tcp_content,conn_delay > (): open||0.00018 -> multi_buffer(): 12 (time P:3001.56 | 0.16) > 10:43:05 : H 3 : I 39 : P 10 : tac,tkb,cplo,up,bpr,bw,iw(): > 7480|59360|0.004|261752|8126.29|1|9 -> multi_buffer(): 19 (time P:1.54 | > 0.27) > 10:43:05 : H 3 : I 34 : P 15 : tcp_status,tcp_content(): open| > 220 (vsFTPd 1.1.3) -> alarm(22): Nothing was done (time P:0.5 | 1.44) > 10:43:05 : H 3 : I 35 : P 15 : tcp_status,tcp_content(): open| > SSH-1.99-OpenSSH_3.5p1 -> alarm(22): Nothing was done (time P:0.15 | > 1.11) > 10:43:05 : H 3 : I 36 : P 15 : tcp_status,tcp_content(): open -> > alarm(22): Nothing was done (time P:0.16 | 1.68) > 10:43:05 : H 3 : I 37 : P 15 : tcp_status,tcp_content(): open -> > alarm(22): Nothing was done (time P:0.14 | 0.94) > 10:43:05 : H 3 : I 38 : P 15 : tcp_status,tcp_content(): open -> > alarm(22): Nothing was done (time P:0.16 | 1.11) > 10:43:05 : H 3 : I 34 : P 20 : > tcp_connection_number:tcp_conn_number(): 0 -> buffer(): 20 (time P:0.55 > | 0.41) > 10:43:05 : H 3 : I 35 : P 20 : > tcp_connection_number:tcp_conn_number(): 0 -> buffer(): 21 (time P:0.14 > | 0.17) > 10:43:05 : H 3 : I 36 : P 20 : > tcp_connection_number:tcp_conn_number(): 0 -> buffer(): 22 (time P:0.12 > | 0.17) > 10:43:05 : H 3 : I 37 : P 20 : > tcp_connection_number:tcp_conn_number(): 0 -> buffer(): 23 (time P:0.1 | > 0.13) > 10:43:05 : H 3 : I 38 : P 20 : > tcp_connection_number:tcp_conn_number(): 0 -> buffer(): 24 (time P:0.1 | > 0.12) > 10:43:05 : H 3 : I 39 : P 20 : no_poller(): 0 -> rrd(*): > up:261752 - tkb:59360 - tac:7480 - bpr:8126.29 - iw:9 - cplo:0.004 - > bw:1 (time P:0.21 | 35.74) > 10:43:05 : H 3 : I 34 : P 30 : tcp_content_analisis(tcp_..ent): > valid|Not Checked -> alarm(39): Nothing was done (time P:0.7 | 0.84) > 10:43:05 : H 3 : I 35 : P 30 : tcp_content_analisis(tcp_..ent): > valid|Not Checked -> alarm(39): Nothing was done (time P:0.12 | 1.22) > 10:43:05 : H 3 : I 36 : P 30 : tcp_content_analisis(tcp_..ent): > valid|Not Checked -> alarm(39): Nothing was done (time P:0.87 | 1.07) > 10:43:05 : H 3 : I 37 : P 30 : tcp_content_analisis(tcp_..ent): > valid|Not Checked -> alarm(39): Nothing was done (time P:0.11 | 0.73) > 10:43:05 : H 3 : I 38 : P 30 : tcp_content_analisis(tcp_..ent): > valid|Not Checked -> alarm(39): Nothing was done (time P:0.12 | 1.08) > 10:43:05 : H 3 : I 34 : P 60 : no_poller(): 0 -> rrd(*): > tcp_conn_number:0 - conn_delay:0.00122 (time P:0.12 | 11.3) > 10:43:05 : H 3 : I 35 : P 60 : no_poller(): 0 -> rrd(*): > tcp_conn_number:0 - conn_delay:0.00018 (time P:0.09 | 11.51) > 10:43:05 : H 3 : I 36 : P 60 : no_poller(): 0 -> rrd(*): > tcp_conn_number:0 - conn_delay:0.0002 (time P:0.09 | 11.57) > 10:43:05 : H 3 : I 37 : P 60 : no_poller(): 0 -> rrd(*): > tcp_conn_number:0 - conn_delay:0.00018 (time P:0.1 | 11.44) > 10:43:05 : H 3 : I 38 : P 60 : no_poller(): 0 -> rrd(*): > tcp_conn_number:0 - conn_delay:0.00018 (time P:0.1 | 11.57) > 10:43:05 : H 3 : I 34 : P LPD : last_poll_date(): 1111689785 -> > db(last_poll_date): 1 (time P:0.21 | 3.47) > 10:43:05 : H 3 : I 35 : P LPD : last_poll_date(): 1111689785 -> > db(last_poll_date): 1 (time P:0.09 | 1.88) > 10:43:05 : H 3 : I 36 : P LPD : last_poll_date(): 1111689785 -> > db(last_poll_date): 1 (time P:0.12 | 2.61) > 10:43:05 : H 3 : I 37 : P LPD : last_poll_date(): 1111689785 -> > db(last_poll_date): 1 (time P:0.13 | 2.28) > 10:43:05 : H 3 : I 38 : P LPD : last_poll_date(): 1111689785 -> > db(last_poll_date): 1 (time P:0.12 | 2.38) > 10:43:05 : H 3 : I 39 : P LPD : last_poll_date(): 1111689785 -> > db(last_poll_date): 1 (time P:0.12 | 2.43) > 10:43:05 : H 3 : Poller End, Total Time: 15168.13 msec. > [EMAIL PROTECTED] engine]$ > This still does not create the RRDTool files for the interface...same error > > Thank you for your help > > Thomas > > -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Javier Szyszlican, Project Leader, JFFNMS [EMAIL PROTECTED] I hope JFFNMS or I were helpful to you, if you can, please donate at http://jffnms.org/donate ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ jffnms-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/jffnms-users
