Javier,
I was forced to switch things around within JFF concernign V2c and
V1 SNMP.
Essentially, for speed purposes, (99% of my devices are Gig or
faster) I had
to move SNMP v2c internal.
Basically, I have had to compile PHP 5.0.3 to use SNMP v2c by
default for SNMP calls.
I then edited jffnms_snmp2 to use -v 1, instead of 2c. Obviously
this means v1 and v2
in the GUI are reversed. Im wondering if there is a way we can
flag this in the JFF config.ini
such that if someone is using PHP with SNMP v2 compiled JFF
switchs the 2 functions?
Part of that involves fixing discovery and responses from v1 and
v2.
--
Karl S. Hagen, CISSP [EMAIL PROTECTED]
Vice President, JPMorganChase & Company
GTI End User Technology, Enterprise Network
1111 Polaris Pkwy, MS OH1-1287 (614) 213-8758 Office
Columbus, OH 43240 (614) 264-8539 Cell
This transmission may contain information that is privileged, confidential
and/or exempt from disclosure under applicable law. If you are not the intended
recipient, you are hereby notified that any disclosure, copying, distribution,
or use of the information contained herein (including any reliance thereon) is
STRICTLY PROHIBITED. If you received this transmission in error, please
immediately contact the sender and destroy the material in its entirety,
whether in electronic or hard copy format. Thank you.
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
jffnms-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/jffnms-users
