Javier,
Thanks for info.
Hmmmmm.... On my last check of Windows it did not have Cron. Is it
embedded somewhere within the Apache world?
Thanks
again!
Buddy
Hi Buddy,
Buddy Shearer wrote:
> Hello All!
>
> Well, since reading so much about this I made the leap.
>
> Everything is installed so far. Customer made, Zones are set, Hosts
> were created and I can see Interfaces.
>
> But there are three items that appear to be strange. "No Events Found"
> and Alarms (How do you set them?)
>
That means your NMS is not seeing any changes, that probably means your cronjobs
and not running.
> My servers have a public SNMP access and that seems to be okay. But
> when I go to drill down it says "The RRDTool files for Interface ID 269
> (from Host ID 13), has not been created by the Poller Process yet"
Again your poller cronjob is not running.
>
> Any ideas or where to point me?
Sure, check your cron log to be sure your cronjobs are running, and if they are
you should try running PHP from the command line.
>
> Thanks in advance...
>
> Buddy
Please read the Archives on more solutions to this problem.
Javier
Buddy Shearer wrote:
> Hello All!
>
> Well, since reading so much about this I made the leap.
>
> Everything is installed so far. Customer made, Zones are set, Hosts
> were created and I can see Interfaces.
>
> But there are three items that appear to be strange. "No Events Found"
> and Alarms (How do you set them?)
>
That means your NMS is not seeing any changes, that probably means your cronjobs
and not running.
> My servers have a public SNMP access and that seems to be okay. But
> when I go to drill down it says "The RRDTool files for Interface ID 269
> (from Host ID 13), has not been created by the Poller Process yet"
Again your poller cronjob is not running.
>
> Any ideas or where to point me?
Sure, check your cron log to be sure your cronjobs are running, and if they are
you should try running PHP from the command line.
>
> Thanks in advance...
>
> Buddy
Please read the Archives on more solutions to this problem.
Javier
