Hi, Thanks for reporting back that soon. The rrdtool-version installed is rrdtool-1.0.49.
The output of "php -q poller2.php 3 50" (where '3' is host Vega and '50'
is device eth0) is as follows (caution, long lines ahead):
----8<----------------------------------------------------------------------
[23:32:16 [EMAIL PROTECTED]:/opt/jffnms/engine] php -q poller2.php 3
50
23:32:27 : H 3 : Poller Start : 19 Items.
23:32:27 : H 3 : I 50 : P 10 : verify_interface_number(): 1 ->
verify_interface_number(): interfacenumber not changed (time P: 11.73 |
B: 3.19)
23:32:27 : H 3 : I 50 : P 15 :
cisco_snmp_ping_start:cisco_snmp_ping_start(): -1 -> buffer(): 1 (time
P: 1.56 | B: 0.32)
23:32:27 : H 3 : I 50 : P 16 : interface_oper_status(8): up ->
alarm(3,,180): Nothing was done (time P: 4.82 | B: 2.76)
23:32:27 : H 3 : I 50 : P 17 : interface_admin_status(7): up ->
db(show_rootmap,down=2|up=1,0): 0 (time P: 4.49 | B: 0.28)
23:32:27 : H 3 : I 50 : P 20 : snmp_counter:input(.1.3..6.1):
-> buffer(): 2 (time P: 3.65 | B: 0.32)
23:32:27 : H 3 : I 50 : P 25 :
snmp_counter:inpackets(.1.3..7.1): -> buffer(): 3 (time P: 3.47 | B:
0.32)
23:32:27 : H 3 : I 50 : P 30 : snmp_counter:output(.1.3..0.1):
-> buffer(): 4 (time P: 3.49 | B: 0.42)
23:32:27 : H 3 : I 50 : P 35 :
snmp_counter:outpackets(.1.3..1.1): -> buffer(): 5 (time P: 3.63 | B:
0.54)
23:32:27 : H 3 : I 50 : P 40 :
snmp_counter:outputerrors(.1.3..0.1): 0 -> buffer(): 6 (time P: 2.89 |
B: 0.32)
23:32:27 : H 3 : I 50 : P 45 :
snmp_counter:inputerrors(.1.3..4.1): 0 -> buffer(): 7 (time P: 2.77 | B:
0.33)
23:32:27 : H 3 : I 50 : P 46 : snmp_counter:drops(.1.3..9.1): 0
-> buffer(): 8 (time P: 2.76 | B: 0.33)
23:32:27 : H 3 : I 50 : P 47 : db:bandwidthin(band..tes):
1250000 -> buffer(): 9 (time P: 0.15 | B: 0.37)
23:32:27 : H 3 : I 50 : P 48 : db:bandwidthout(band..tes):
1250000 -> buffer(): 10 (time P: 0.15 | B: 0.34)
23:32:27 : H 3 : I 50 : P 50 : cisco_snmp_ping_wait(): -1 ->
no_backend(): 0 (time P: 0.35 | B: 0.1)
23:32:27 : H 3 : I 50 : P 55 :
cisco_snmp_ping_get_pl:packetloss(): 0 -> buffer(): 11 (time P: 0.32 |
B: 0.33)
23:32:27 : H 3 : I 50 : P 60 : cisco_snmp_ping_get_rtt:rtt(): 0
-> buffer(): 12 (time P: 0.32 | B: 0.33)
23:32:27 : H 3 : I 50 : P 65 : cisco_snmp_ping_end(): -1 ->
no_backend(): 0 (time P: 0.29 | B: 0.1)
23:32:27 : H 3 : I 50 : P 80 : no_poller(): 0 -> rrd(*):
inputerrors:0 - outputerrors:0 - rtt:0 - packetloss:0 - drops:0 -
bandwidthin:1250000 - bandwidthout:1250000 (time P: 0.12 | B: 67.11)
23:32:27 : H : I 50 : P LPD : last_poll_date(): 1117488747 ->
db(last_poll_date): 1 (time P: 0.11 | B: 13.19)
23:32:27 : H 3 : Poller End, Total Time: 234 msec.
--->8------------------------------------------------------------------
Thank you,
Benni
Am Montag, den 30.05.2005, 17:48 -0300 schrieb Javier Szyszlican:
> Hi,
>
> I'm glad you like jffnms.
>
> Please check if your rrdtool version is 1.0.x, branch 1.2.x is not supported
> at
> the moment.
>
> Also it will be good if you could show us the result of the poller2.php (or
> poller) output .
>
> # cd /opt/jffnms/engine
> # php -q poller2.php HOST_ID INTERFACE_ID
>
> Javier
>
> Benjamin Judas wrote:
> > Hi,
> >
> > I hope this isn't the most frequently asked question on this
> > mailinglist, but searching the archives didn't turn up anything
> > interesting for me, so I think it is ok to write this e-mail.
> >
> > I did a complete reinstall of JFFNMS last thursday. I was using an older
> > 0.7-Version from last october or so without any problems. Now I wiped
> > the complete database and completely reinstalled JFFNMS. First of all I
> > have to say, that I am very suprised about the progress between the
> > version I had previously installed and the current one. However, there
> > is one problem left: I don't get any graphs for my network interfaces
> > (not from any of the 7 machines I am monitoring here). Disk-Space, CPU-
> > and Memory-Utilization works fine and is perfectly graphed. I already
> > tried to set a 'manual' value in the device setup (i.e. change from
> > "When poller runs" to "every five minutes") but it didn't help. Note:
> > The graph is empty: It is present but without any data in it.
> >
> > Manually running snmpget returns the values perfectly. Manually running
> > "php -q /opt/jffnms/engine/rrd_analizer.php" didn't show up any
> > suspicious output - unfortunately, because this doesn't return *any*
> > information ;)
> >
> > I hope someone in here has an idea what could be wrong.
> >
> > Regards,
> >
> > Benni
>
--
Benjamin Judas
---------------------------------------------------------------------
Gentoo-developer http://dev.gentoo.org/~beejay
Giessen, Germany http://www.gentoo.org
GPG-Key : 0xC31DEDD8
Key-Fingerprint : 4E65 AAFE 785B 61D8 E4D9 1671 E017 87B7 C31D EDD8
Jabber : [EMAIL PROTECTED]
signature.asc
Description: This is a digitally signed message part
