Hi Doug, The problem is not related to your Hardware, the error is mine, I didn't use Cisco snmp trap for a long time. TTY traps are not in the notification-type group like others.
Cisco Snmp article explain why http://www.cisco.com/warp/public/477/SNMP/snmp_traps.html ........................... In order to enable the router to send SNMP traps, use the snmp-server enable traps global configuration command. Use the no form of this command to disable SNMP notifications. snmp-server enable traps [notification-type] [notification-option] no snmp-server enable traps [notification-type] [notification-option] In order to enable the router to send SNMP traps, issue the snmp-server enable traps global configuration command. Issue the no form of this command in order to disable SNMP notifications. ... BUT ..... Note: Not all [notification-type] options are supported on both of these commands. For example, [notification-type] x25 and teletype (tty) are not used for snmp-server enable trap. x25, and tty traps are enabled by default. For example, in order to make a Cisco IOS Software device report only configuration, Border Gateway Protocol (BGP), and tty traps to Network Management System 10.10.10.10, issue these commands: snmp-server host 10.10.10.10 public config bgp tty snmp-server enable traps config snmp-server enable traps bgp ................. Cheers, _______________ David LIMA Professional Services www.scc.com ________________________________________ De : Doug Veldhuisen [mailto:[EMAIL PROTECTED] Envoyé : vendredi 13 janvier 2006 17:22 À : LIMA David; Doug Veldhuisen; Javier Szyszlican Cc : jffnms-users@lists.sourceforge.net Objet : RE: [jffnms-users] Eliminating the Cisco TTY Trap David: Thank you for the response: Tried your solutions and the only one that works for me is the traphandle. the cisco one does not. Its an invalid statement. Might work on newer hardware, but the stuff I have, no. Thanks much Doug At 05:21 AM 1/13/2006, LIMA David wrote: Hi Doug, You can eliminate those traps before inserting them into JFFNMS DB 1 - At cisco stage this should work for the conf no snmp-server enable traps tty On the version of devices I have: 2924xl, 2950's and 8510 this command is invalid. 2 - At snmp trap daemon These work nicely. traphandle .1.3.6.1.4.1.9.0.1 /bin/true or traphandle SNMPv2-SMI::enterprises.9.0.1 /bin/true if you didn't specify "printNumericOids yes" in /etc/snmp/snmp.conf Cheers, _______________ David LIMA Professional Services www.scc.com ________________________________________ De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] De la part de Doug Veldhuisen Envoyé : jeudi 12 janvier 2006 16:53 À : Javier Szyszlican Cc : jffnms-users@lists.sourceforge.net Objet : Re: [jffnms-users] Eliminating the Cisco TTY Trap Thank you very much, cleared up all that clutter, Doug At 07:59 PM 1/11/2006, Javier Szyszlican wrote: You could create a new trap receiver (in admin/internal config/event analizer). Match it to the 'static' Receiver command without any more parameters. This is what I did with the TCP Port trap. +-------+----------+-----------------------+---------------------+----------------------+-------------------------+------------------------+--------------------------+-----------------+ | ID | Position | Description | Interface Type | OID Match | Receiver Command (file) | Parameters | Backend | Stop if Matches | +-------+----------+-----------------------+---------------------+----------------------+-------------------------+------------------------+--------------------------+-----------------+ | 3 | 10 | Link Down | Physical Interfaces | .1.3.6.1.6.3.1.1.5.3 | static | down,interfacenumber,1 | Alarm Verify Operational | X | | 2 | 10 | Link Up | Physical Interfaces | .1.3.6.1.6.3.1.1.5.4 | static | up,interfacenumber,1 | Alarm Verify Operational | X | | 10001 | 10 | TCP Port Trap | TCP Ports | .1.3.6.1.4.1.9.0.1 | static | | No Backend | X | | 1 | 99 | Default Trap Receiver | No Interface Type | .* | unknown | | Unknown Event | X | +-------+----------+-----------------------+---------------------+----------------------+-------------------------+------------------------+--------------------------+-----------------+ Javier Doug Veldhuisen wrote: I have Jffnms 0.8.2 installed on a Fedora RedHat 3 system. The system runs very well and monitors just what I need it to do. However, could someone please tell me how to get jffnms to not look a specific trap from cisco devices? What I want to eliminate is the tty trap. Documentation says this is enabled by default, but cannot find a good spot to disable it. I think the OID = .1.3.6.1.4.1.9.0.1 I am covered in these traps and would like to drop them from existence or could someone please tell me a way to manage them. Doug Veldhuisen ------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click _______________________________________________ jffnms-users mailing list jffnms-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/jffnms-users -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Javier Szyszlican, Project Leader, JFFNMS [EMAIL PROTECTED] I hope JFFNMS or I were helpful to you, if you can, please donate at http://jffnms.org/donate ------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click _______________________________________________ jffnms-users mailing list jffnms-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/jffnms-users ------------------------------------------------------------------------------------------ Ce message contient des informations dont le contenu est susceptible d'être confidentiel. Il est destiné au(x) destinataire(s) indiqué(s) exclusivement. A moins que vous ne fassiez partie de la liste des destinataires, ou que vous soyez habilité à recevoir le mail à leur place, il vous est interdit de le copier, de l'utiliser ou de dévoiler son contenu à un tiers. Si vous avez reçu cet email par erreur, merci de prendre contact avec l'émetteur. Les opinions exprimées dans cet e-mail sont celles de l'émetteur et ne reflètent pas nécessairement celles de l'entreprise. Ce e-mail peut contenir des pièces jointes dont certaines pourraient contenir des virus qui pourraient endommager votre système informatique. La compagnie a pris toutes dispositions afin de minimiser ce risque et décline toute responsabilité pour toute perte ou dommage résultant directement ou indirectement de l'utilisation de cet email ou de son contenu. Il vous appartient d'effectuer vos propres contrôles anti-virus avant d'ouvrir la ou les pièces jointes. ------------------------------------------------------------------------------------------ ------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://ads.osdn.com/?ad_idv37&alloc_id865&op=click _______________________________________________ jffnms-users mailing list jffnms-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/jffnms-users
