You have to set the RO community in jffnms to 'test1', RW is only issued for
certain stuff.
Javier
Roubel Zaman wrote:
Hello,
I am running JFFNMS on a windows box, when adding a host to accept snmp
from a switch on first hop from the server I get nothing. No interfaces
found or anything, this is how I have it setup. Am I missing something
here.
Setup on switch
HP ProCurve Switch 4108GL(config)# show snmp-server
SNMP Communities
Community Name MIB View Write Access
---------------- -------- ------------
test1 Manager Unrestricted
Trap Receivers
Send Authentication Traps [No] : Yes
Address Community Events Sent in Trap
---------------------- ---------------- -------------------
129.1.1.13 test1 All
Setup on JFFNMS which is 129.1.1.13
Host setup
Host name Lan Switch / Ip address 129.1.1.4 / RO communutiy not set / RW
community test1 / auto discovery standard for switches / polling is also
available.
--
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Javier Szyszlican, Project Leader, JFFNMS
[EMAIL PROTECTED]
I hope JFFNMS or I were helpful to you, if you
can, please donate at http://jffnms.org/donate
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
_______________________________________________
jffnms-users mailing list
jffnms-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/jffnms-users
