> ----- Message from Craig Small <[EMAIL PROTECTED]> on Fri, 7 Dec
> 2007 15:41:46 +1100 -----
>
> To:
>
> jffnms-users@lists.sourceforge.net
>
> Subject:
>
> Re: [jffnms-users] no data on physical interface graphs
>
> On Wed, Dec 05, 2007 at 05:10:06PM -0500, James M Stump wrote:
> > 17:01:00 : H 14 : I 262 : P 20 : snmp_counter:input(.1.3..6.2):
->
> > buffer(): 2 (time P: 1.6 | B: 0.1)
> > 17:01:00 : H 14 : I 262 : P 25 :
snmp_counter:inpackets(.1.3..7.2):
> > -> buffer(): 3 (time P: 1.6 | B: 0.1)
> > 17:01:00 : H 14 : I 262 : P 30 : snmp_counter:output(.1.3..0.2):
->
> > buffer(): 4 (time P: 1.64 | B: 0.1)
> > 17:01:00 : H 14 : I 262 : P 35 :
snmp_counter:outpackets(.1.3..1.2):
> > -> buffer(): 5 (time P: 1.6 | B: 0.1)
> There's something wrong with your SNMP setup, you're supposed to see
> numbers between the ): and ->
>
> - Craig
> --
> Craig Small GnuPG:1C1B D893 1418 2AF4 45EE 95CB C76C E5AC 12CA DFA5
> http://www.enc.com.au/ csmall at : enc.com.au
> http://www.debian.org/ Debian GNU/Linux, software should be Free
Yes Craig - it appears that you are correct about something being wrong
with SNMP on my JFFNMS box. I've been looking at the hosts and can't find
anything wrong with them using a MIB browser, but yet there is no data
returned in the poller process for interface stats. I'm assuming the
problem must be with my Fedora Core 5 box:( That is not good for me because
I'm still a noob on Linux - I am an expert admin on SNMP in Windows now
though. I have updated everything on my box I can think of...so I don't
know where to start troubleshooting. I have been through all the
permissions in my folders and they seem to be good.
Should I remove PHP and reinstall? I am assuming the SNMP support in PHP is
what's to blame. Anything else to check?
Here is an example from JFFNMS:
php poller2.php 25 356 0 0
14:36:45 : H 25 : Poller Start : 19 Items.
14:36:45 : H 25 : I 356 : P 10 : verify_interface_number(): 65540 ->
verify_interface_number(): interfacenumber not changed (time P: 17.07 | B:
1.26)
[snip]
14:36:45 : H 25 : I 356 : P 16 : interface_oper_status(8): up ->
alarm(3,,180): Nothing was done (time P: 15.37 | B: 1.34)
14:36:45 : H 25 : I 356 : P 17 : interface_admin_status(7): up ->
db(show_rootmap,down=2|up=1,0): 0 (time P: 15.5 | B: 0.1)
14:36:45 : H 25 : I 356 : P 20 : snmp_counter:input(.1.3..540): ->
buffer(): 2 (time P: 15.56 | B: 0.1)
14:36:45 : H 25 : I 356 : P 25 : snmp_counter:inpackets(.1.3..540):
-> buffer(): 3 (time P: 16.44 | B: 0.1)
14:36:45 : H 25 : I 356 : P 30 : snmp_counter:output(.1.3..540): ->
buffer(): 4 (time P: 15.49 | B: 0.11)
14:36:45 : H 25 : I 356 : P 35 : snmp_counter:outpackets(.1.3..540):
-> buffer(): 5 (time P: 14.44 | B: 0.1)
14:36:45 : H 25 : I 356 : P 40 :
snmp_counter:outputerrors(.1.3..540): 0 -> buffer(): 6 (time P: 7.69 | B:
0.1)
14:36:45 : H 25 : I 356 : P 45 : snmp_counter:inputerrors(.1.3..540):
0 -> buffer(): 7 (time P: 8.33 | B: 0.11)
14:36:45 : H 25 : I 356 : P 46 : snmp_counter:drops(.1.3..540): 0 ->
buffer(): 8 (time P: 8.51 | B: 0.11)
14:36:45 : H 25 : I 356 : P 47 : db:bandwidthin(band..tes): 12500000
-> buffer(): 9 (time P: 0.1 | B: 0.1)
14:36:45 : H 25 : I 356 : P 48 : db:bandwidthout(band..tes): 12500000
-> buffer(): 10 (time P: 0.06 | B: 0.09)
[snip]
14:36:45 : H 25 : I 356 : P 80 : no_poller(): 0 -> rrd(*):
inputerrors:0 - outputerrors:0 - rtt:0 - packetloss:0 - drops:0 -
bandwidthin:12500000 - bandwidthout:12500000 (time P: 0.08 | B: 22.94)
[snip]
14:36:45 : H 25 : Poller End, Total Time: 192 msec.
And info from the same box in the iReasoning MIB Browser:
ifIndex.65540 65540
ifDescr.65540 Broadcom NetXtreme Gigabit Ethernet
ifType.65540 ethernetCsmacd
ifMtu.65540 1500
ifSpeed.65540 100000000
ifPhysAddress.65540 00-14-5E-2A-A4-50
ifAdminStatus.65540 up
ifOperStatus.65540 up
ifLastChange.65540 0 millisecond
ifInOctets.65540 3796446920
ifInUcastPkts.65540 98597125
ifInNUcastPkts.65540 458779
ifInDiscards.65540 0
ifInErrors.65540 0
ifInUnknownProtos.65540 113736
ifOutOctets.65540 2390088136
ifOutUcastPkts.65540 71279890
ifOutNUcastPkts.65540 31832
ifOutDiscards.65540 0
ifOutErrors.65540 0
ifOutQLen.65540 0
ifSpecific.65540 .0.0
Thanks,
James Stump
-------------------------------------------------------------------------
SF.Net email is sponsored by:
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services
for just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
jffnms-users mailing list
jffnms-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/jffnms-users
