On Thu, May 15, 2008 at 9:21 AM, Craig Small <[EMAIL PROTECTED]> wrote:
> On Wed, May 14, 2008 at 08:47:00AM -0400, Kyle Gonzales wrote:
> > I believe I found my issue. It looks like the SNMP input/output
> > rate/packets poller item was at fault. It listed two different MIBs to
> poll
> > for this information, and the poller was using the 2nd MIB listed, which
> did
> > not work (that MIB was actually trying to retrieve the MAC address of the
> > interface!). I removed the 2nd MIB, and now the poller is collecting
> > traffic information for the interface.
> >
> > Was that the intent all along? To provide both, and have the user
> manually
> > edit the field to get the one they needed?
> That doesn't sound right, the pollers really only should be polling for
> one thing but the mac address may be used to check that there hasn't
> been any renumbering.
>
> Lots of people use this particular poller so I'm surprised to see it
> gave you any
> trouble.<https://lists.sourceforge.net/lists/listinfo/jffnms-users>
It surprised me as well. From the output, the poller was never polling for
the first MIB in the field, only the 2nd MIB.
Regardless, once I removed the 2nd MIB value, things are working swimmingly.
I am now moving on to setting up events and trigger, to send emails into a
ticketing system. I am enjoying JFFNMS very much so far!
--
Kyle Gonzales
[EMAIL PROTECTED]
GPG Pub Key: 9C3FBD51
Read My Tech Blog:
http://techiebloggiethingie.blogspot.com/
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
jffnms-users mailing list
jffnms-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/jffnms-users
