I'm working on a set of kernel patches to change how writeback errors
are handled and reported in the kernel. Instead of reporting a
writeback error to only the first fsync caller on the file, I aim
to make the kernel report them once on every file description.
This patch adds a test for the new behavior. Basically, open many fds
to the same file, turn on dm_error, write to each of the fds, and then
fsync them all to ensure that they all get an error back.
To do that, I'm adding a new tools/dmerror script that the C program
can use to load the error table. For now, that's all it can do, but
we can fill it out with other commands as necessary.
Signed-off-by: Jeff Layton <jlay...@redhat.com>
---
common/dmerror | 13 +++--
src/Makefile | 2 +-
src/fsync-err.c | 138 ++++++++++++++++++++++++++++++++++++++++++++++++++
tests/generic/999 | 75 +++++++++++++++++++++++++++
tests/generic/999.out | 3 ++
tests/generic/group | 1 +
tools/dmerror | 47 +++++++++++++++++
7 files changed, 273 insertions(+), 6 deletions(-)
create mode 100644 src/fsync-err.c
create mode 100755 tests/generic/999
create mode 100644 tests/generic/999.out
create mode 100755 tools/dmerror
diff --git a/common/dmerror b/common/dmerror
index d46c5d0b7266..238baa213b1f 100644
--- a/common/dmerror
+++ b/common/dmerror
@@ -23,22 +23,25 @@ if [ $? -eq 0 ]; then
_notrun "Cannot run tests with DAX on dmerror devices"
fi
-_dmerror_init()
+_dmerror_setup()
{
local dm_backing_dev=$SCRATCH_DEV
- $DMSETUP_PROG remove error-test > /dev/null 2>&1
-
local blk_dev_size=`blockdev --getsz $dm_backing_dev`
DMERROR_DEV='/dev/mapper/error-test'
DMLINEAR_TABLE="0 $blk_dev_size linear $dm_backing_dev 0"
+ DMERROR_TABLE="0 $blk_dev_size error $dm_backing_dev 0"
+}
+
+_dmerror_init()
+{
+ _dmerror_setup
+ $DMSETUP_PROG remove error-test > /dev/null 2>&1
$DMSETUP_PROG create error-test --table "$DMLINEAR_TABLE" || \
_fatal "failed to create dm linear device"
-
- DMERROR_TABLE="0 $blk_dev_size error $dm_backing_dev 0"
}
_dmerror_mount()
diff --git a/src/Makefile b/src/Makefile
index e5042c9b7d8e..eb8ff6c4a344 100644
--- a/src/Makefile
+++ b/src/Makefile
@@ -12,7 +12,7 @@ TARGETS = dirstress fill fill2 getpagesize holes lstat64 \
godown resvtest writemod makeextents itrash rename \
multi_open_unlink dmiperf unwritten_sync genhashnames t_holes \
t_mmap_writev t_truncate_cmtime dirhash_collide t_rename_overwrite \
- holetest t_truncate_self t_mmap_dio af_unix t_mmap_stale_pmd
+ holetest t_truncate_self t_mmap_dio af_unix t_mmap_stale_pmd fsync-err
LINUX_TARGETS = xfsctl bstat t_mtab getdevicesize preallo_rw_pattern_reader \
preallo_rw_pattern_writer ftrunc trunc fs_perms testx looptest \
diff --git a/src/fsync-err.c b/src/fsync-err.c
new file mode 100644
index 000000000000..8ad27b3da3e7
--- /dev/null
+++ b/src/fsync-err.c
@@ -0,0 +1,138 @@
+/*
+ * fsync-err.c: test whether writeback errors are reported to all open fds
+ * Copyright (c) 2017: Jeff Layton <jlay...@redhat.com>
+ *
+ * Open a file several times, write to it and then fsync. Flip dm_error over
+ * to make the backing device stop working. Overwrite the same section and
+ * call fsync on all fds and verify that we get errors on all of them. Then,
+ * fsync one more time on all of them and verify that they return 0.
+ */
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <unistd.h>
+
+#define NUM_FDS 10
+
+static void usage() {
+ fprintf(stderr, "Usage: fsync-err <filename>\n");
+}
+
+int main(int argc, char **argv)
+{
+ int fd[NUM_FDS], ret, i;
+ char *fname, *buf;
+
+ if (argc < 1) {
+ usage();
+ return 1;
+ }
+
+ /* First argument is filename */
+ fname = argv[1];
+
+ for (i = 0; i < NUM_FDS; ++i) {
+ fd[i] = open(fname, O_WRONLY | O_CREAT | O_TRUNC, 0644);
+ if (fd[i] < 0) {
+ printf("open of fd[%d] failed: %m\n", i);
+ return 1;
+ }
+ }
+
+ buf = "foobar";
+ for (i = 0; i < NUM_FDS; ++i) {
+ ret = write(fd[i], buf, strlen(buf) + 1);
+ if (ret < 0) {
+ printf("First write on fd[%d] failed: %m\n", i);
+ return 1;
+ }
+ }
+
+ for (i = 0; i < NUM_FDS; ++i) {
+ ret = fsync(fd[i]);
+ if (ret < 0) {
+ printf("First fsync on fd[%d] failed: %m\n", i);
+ return 1;
+ }
+ }
+
+ /* flip the device to non-working mode */
+ ret = system("./tools/dmerror load_error_table");
+ if (ret) {
+ if (WIFEXITED(ret))
+ printf("system: program exited: %d\n",
+ WEXITSTATUS(ret));
+ else
+ printf("system: 0x%x\n", (int)ret);
+
+ return 1;
+ }
+
+ for (i = 0; i < NUM_FDS; ++i) {
+ ret = write(fd[i], buf, strlen(buf) + 1);
+ if (ret < 0) {
+ printf("Second write on fd[%d] failed: %m\n", i);
+ return 1;
+ }
+ }
+
+ for (i = 0; i < NUM_FDS; ++i) {
+ ret = fsync(fd[i]);
+ /* Now, we EXPECT the error! */
+ if (ret >= 0) {
+ printf("Success on second fsync on fd[%d]!\n", i);
+ return 1;
+ }
+ }
+
+ /* flip the device to working mode */
+ ret = system("./tools/dmerror load_working_table");
+ if (ret) {
+ if (WIFEXITED(ret))
+ printf("system: program exited: %d\n",
+ WEXITSTATUS(ret));
+ else
+ printf("system: 0x%x\n", (int)ret);
+
+ return 1;
+ }
+
+ for (i = 0; i < NUM_FDS; ++i) {
+ ret = fsync(fd[i]);
+ if (ret < 0) {
+ /* Now the error should be clear */
+ printf("Third fsync on fd[%d] failed: %m\n", i);
+ return 1;
+ }
+ }
+
+ /*
+ * reopen each file to guarantee the same one stays in core. fsync
+ * each one to make sure we see no errors.
+ */
+ for (i = 0; i < NUM_FDS; ++i) {
+ ret = close(fd[i]);
+ if (ret < 0) {
+ printf("Close of fd[%d] returned unexpected error:
%m\n", i);
+ return 1;
+ }
+ fd[i] = open(fname, O_WRONLY | O_CREAT | O_TRUNC, 0644);
+ if (fd[i] < 0) {
+ printf("Second open of fd[%d] failed: %m\n", i);
+ return 1;
+ }
+ ret = fsync(fd[i]);
+ if (ret < 0) {
+ /* New opens should not return an error */
+ printf("First fsync after reopen of fd[%d] failed:
%m\n", i);
+ return 1;
+ }
+ }
+
+ printf("Test passed!\n");
+ return 0;
+}
diff --git a/tests/generic/999 b/tests/generic/999
new file mode 100755
index 000000000000..57e093b43416
--- /dev/null
+++ b/tests/generic/999
@@ -0,0 +1,75 @@
+#! /bin/bash
+# FS QA Test No. 999
+#
+# Open a file several times, write to it, fsync on all fds and make sure that
+# they all return 0. Change the device to start throwing errors. Write again
+# on all fds and fsync on all fds. Ensure that we get errors on all of them.
+# Then fsync on all one last time and verify that all return 0.
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2017, Jeff Layton <jlay...@redhat.com>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -rf $tmp.* $testdir
+ _dmerror_cleanup
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/dmerror
+
+# real QA test starts here
+_supported_os Linux
+_require_scratch
+_require_logdev
+_require_dm_target error
+
+rm -f $seqres.full
+
+echo "Format and mount"
+$XFS_IO_PROG -d -c "pwrite -S 0x7c -b 1048576 0 $((64 * 1048576))"
$SCRATCH_DEV >> $seqres.full
+_scratch_mkfs > $seqres.full 2>&1
+_dmerror_init
+_dmerror_mount >> $seqres.full 2>&1
+_dmerror_unmount
+_dmerror_mount
+
+_require_fs_space $SCRATCH_MNT 8192
+
+testfile=$SCRATCH_MNT/fsync-err-test
+
+$here/src/fsync-err $testfile
+
+# success, all done
+_dmerror_load_working_table
+_dmerror_unmount
+_dmerror_cleanup
+_repair_scratch_fs >> $seqres.full
+status=0
+exit
diff --git a/tests/generic/999.out b/tests/generic/999.out
new file mode 100644
index 000000000000..2e48492ff6d1
--- /dev/null
+++ b/tests/generic/999.out
@@ -0,0 +1,3 @@
+QA output created by 999
+Format and mount
+Test passed!
diff --git a/tests/generic/group b/tests/generic/group
index 9fc7f9d419a8..854c39277dd5 100644
--- a/tests/generic/group
+++ b/tests/generic/group
@@ -432,3 +432,4 @@
427 auto quick aio rw
428 auto quick
429 auto encrypt
+999 auto quick
diff --git a/tools/dmerror b/tools/dmerror
new file mode 100755
index 000000000000..fc0de295e778
--- /dev/null
+++ b/tools/dmerror
@@ -0,0 +1,47 @@
+#!/bin/bash
+#-----------------------------------------------------------------------
+# Copyright (c) 2017, Jeff Layton <jlay...@redhat.com>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+
+. ./common/rc
+. ./common/dmerror
+
+_dmerror_setup
+
+case $1 in
+cleanup)
+ _dmerror_cleanup
+ ;;
+init)
+ _dmerror_init
+ ;;
+load_error_table)
+ _dmerror_load_error_table
+ ;;
+load_working_table)
+ _dmerror_load_working_table
+ ;;
+mount)
+ _dmerror_mount
+ ;;
+*)
+ echo "Usage: $0
{init|cleanup|load_error_table|load_working_table|mount}"
+ exit 1
+ ;;
+esac
+
+status=0
+exit
--
2.9.3
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Jfs-discussion mailing list
Jfs-discussion@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/jfs-discussion
