I'm running with my Windows settings set to "Windows Standard", and all of
the settings JFW needs to function correctly, and it still hasn't fixed the
"Auto-Graphics Labeler". That thing has a mind of its own. It works when
it wants, and doesn't work when it doesn't feel like it. You can be in a
program with tool-tips that pop up every time you move the mouse over a
graphic, and it'll still say "labeled 0 graphics". This is a great idea,
but HJ sure needs to shake the bugs out of it. I have better luck labeling
by hand most of the time.
The only thing I can possibly see, is maybe it's a timing issue. Since it
takes Tool-Tips sometimes longer to speak than others, maybe it's just not
waiting long enough for the information. I'm by no means an expert, so this
is just a theory that seems to make sense to me.
Brian
----- Original Message -----
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, June 27, 1999 2:22 PM
Subject: Re: auto graphics labeler problem
> Hi Hal,
>
> I had the identical problem when on the phone with Jim at tech with Jaws.
He
> found that my windows standard had not been chosen in my appearance tab as
it
> was not listed as a choice. We tried different choices and ngot varying
> numbers of graphics labeled when using different choices. Until I get my
> windows standard choice back in there, I am told it will probably not
label
> or read most of the graphics it should read when using the auto graphics
> labeler. You might want to try different choices to see if you get more
> graphics labeled in a different setting. Regards, Lynn W.
> -
> Visit the jfw ml web page: http://jfw.cjb.net
-
Visit the jfw ml web page: http://jfw.cjb.net
