What version is that? I'd prefer you did these experiments on the latest nightly.
-Mike On 5 Sep 2002 at 15:21, Sosnowski, Andrew P [IT] wrote: > > Tried this with a couple of more report pages of the same type that had the > problem where captured html was incomplete. > I looked at the html captured in several places: > 1) log file- this is always truncated at the same place > I did find a non-ascii character in one of the files at the point of > truncation but not all files have this. > > 2) View Results- sometimes captured the whole file, sometimes truncated > in that same place > 3) View Results Tree- also shows truncated html in same place. > > This for the same page in the same run of the test!! > > > In terms of looking in the log, is there something I need to do to turn on > the log; the version I'm using doesn't seem to write to a log file. > > Thanks again > Andy > > > -----Original Message----- > From: Mike Stover [mailto:[EMAIL PROTECTED]] > Sent: Thursday, September 05, 2002 9:18 AM > To: JMeter Users List > Subject: Re: Re; Functional Mode Checkbox and Quick and Dirty Functional > Testi ng > > > My only thought on this is that Avalon's ConfigurationSerializer is choking > on some > special character in your page and throwing an exception, and JMeter is > catching > it silently. Have you checked JMeter's logs? It's recently improved, so > it'd be nice > to use the logging system to track this down. Look in > org.apache.jmeter.save.SaveService.java for places to put interesting log > statements. > > -Mike > > On 5 Sep 2002 at 8:53, Sosnowski, Andrew P [IT] wrote: > > > > > I thought I had sent this mail previously but it seems as though it didn't > > go? > > Sorry for the delay. > > > > I have not yet figured out why the html page is not always completely > > captured. > > However when I use the "View Results" visualizer, the full page if there? > > > > It seems to stop consistently in the same place in this page. > > > > Also I put the page through an html checker and it passed (plus it > displays > > properly in both IE 5.x,6 and NS 4.x and 6.x. > > > > Any ideas? > > Andy > > > > -----Original Message----- > > From: Sosnowski, Andrew P [IT] > > Sent: Tuesday, August 27, 2002 10:25 AM > > To: '[EMAIL PROTECTED]'; Sosnowski, Andrew P [IT] > > Subject: RE: Functional Mode Checkbox and quick and dirty Functional > > testi ng > > > > > > Sounds good. > > One more thing I've discovered in my testing; the html for one of my pages > > is not being fully loaded into the log file; is there any limitation to > the > > storing of html that you know of? > > > > (Another curious thing is that the html saved changes all the html angle > > brackets to < and > Not a problem just curious) > > > > The page in question does display properly in both Netscape and IE. > > > > This would limit the usefulness of this new feature; there was no error > > detected but I did not have an assertion for </html> > > > > Thanks > > Andy > > > > -----Original Message----- > > From: Mike Stover [mailto:[EMAIL PROTECTED]] > > Sent: Tuesday, August 27, 2002 9:26 AM > > To: Sosnowski, Andrew P [IT] > > Subject: RE: Functional Mode Checkbox and quick and dirty Functional > > testi ng > > > > > > Here's kinda what I imagined: > > > > The visualizer looks like the View Results Tree (ie, there's a tree that > > holds results or some > > sort, you click on a node, you see the details below). > > > > It also has 2 additional fields where the user can specify the name of two > > requests in the test. > > The visualizer will then create diffs against these two requests, and from > > the diff info, create > > the nodes in the tree. Thus, each node in the tree isn't a normal result > > but rather, the diff > > between the two specified results. > > > > I don't know exactly what your needs are, so you make it whatever you > want, > > of course. The > > visualizer could be dependent on a "diff" command being on the system, and > > windows users > > can always install cygwin (it's the first thing I do on any windows box). > > It might also be worth a > > few minutes to search the web for a diff Java implementation. > > > > -Mike > > > > On 27 Aug 2002 at 7:17, Sosnowski, Andrew P [IT] wrote: > > > > > Hi Mike > > > > > > This seems to be working for me pretty well; so far I am using perl to > > parse > > > out the html files, massage them and compare them but that could be done > > > easily with Java regular expressions as well. > > > > > > You mention creating a visualizer; I'd like to perhaps build this if you > > > feel it fits into jMeter plans; what do you think it should look like? > Any > > > pointers? > > > I think there should be an additional input field to specify the run > that > > is > > > to be compared. > > > The actual result would consist of the output of the diff command on the > > > html files within the 2 logs. However I'm not sure if there is a > > > cross-platform version of diff. > > > > > > Thanks in advance > > > Andy > > > > > > -----Original Message----- > > > From: Mike Stover [mailto:[EMAIL PROTECTED]] > > > Sent: Tuesday, August 20, 2002 5:09 PM > > > To: JMeter Users List > > > Subject: Re: Functional Mode Checkbox and quick and dirty Functional > > > testing > > > > > > > > > First, you have noticed the one and only difference that choosing > > > "functional testing" makes. > > > > > > Second, that sounds like an interesting idea - to make a visualizer that > > > compares the > > > functional differences between two test runs? I think your proposed use > > of > > > such a tool is an > > > excellent idea. > > > > > > -Mike > > > > > > On 20 Aug 2002 at 15:21, Sosnowski, Andrew P [IT] wrote: > > > > > > > Hi Mike, > > > > > > > > Can you give me an idea of what is the intent behind the Functional > Mode > > > > testing checkbox on the front page? > > > > > > > > > > > > This was my plan for a quick and dirty functional test: > > > > We have a Staging environment and a production environment for our > app. > > > > When we make a new release of our app I would like to capture and > > compare > > > > the html responses of running a test script with the new version of > the > > > app > > > > on the Staging Environment and the old version still in Production. > > > > Then I would compare the 2 versions of html and make sure that nothing > > > > changed that was not expected to change. > > > > Of course I have to ignore Referrer Headers values and time-stamps and > > > > various cookies that are different on the different servers. > > > > > > > > When I tried using this mode I did find the html within <binary> tags > in > > > the > > > > log file. > > > > It looks like it might work as a quick and dirty way to compare. > > > > > > > > Perhaps it might be worth building in some additional support for this > > > kind > > > > of testing into jMeter? For example store html cleaned of timestamps > in > > a > > > > file separate from the log file (or jtl file) > > > > I might be willing to do this if others would find it useful. Also any > > > ideas > > > > of how to make it more useful and general are appreciated > > > > > > > > What do you think? > > > > > > > > Andy > > > > > > > > > > > > -- > > > > To unsubscribe, e-mail: > > > <mailto:[EMAIL PROTECTED]> > > > > For additional commands, e-mail: > > > <mailto:[EMAIL PROTECTED]> > > > > > > > > > > > > > > > > -- > > > Michael Stover > > > [EMAIL PROTECTED] > > > Yahoo IM: mstover_ya > > > ICQ: 152975688 > > > > > > -- > > > To unsubscribe, e-mail: > > > <mailto:[EMAIL PROTECTED]> > > > For additional commands, e-mail: > > > <mailto:[EMAIL PROTECTED]> > > > > > > > > -- > > Michael Stover > > [EMAIL PROTECTED] > > Yahoo IM: mstover_ya > > ICQ: 152975688 > > > > -- > > To unsubscribe, e-mail: > <mailto:[EMAIL PROTECTED]> > > For additional commands, e-mail: > <mailto:[EMAIL PROTECTED]> > > > > > > -- > Michael Stover > [EMAIL PROTECTED] > Yahoo IM: mstover_ya > ICQ: 152975688 > > -- > To unsubscribe, e-mail: > <mailto:[EMAIL PROTECTED]> > For additional commands, e-mail: > <mailto:[EMAIL PROTECTED]> > > -- > To unsubscribe, e-mail: <mailto:[EMAIL PROTECTED]> > For additional commands, e-mail: <mailto:[EMAIL PROTECTED]> > -- Michael Stover [EMAIL PROTECTED] Yahoo IM: mstover_ya ICQ: 152975688 -- To unsubscribe, e-mail: <mailto:[EMAIL PROTECTED]> For additional commands, e-mail: <mailto:[EMAIL PROTECTED]>
