Yes, duration and startup delay override the corresponding end and start-time parameters.
This is documented in the component reference page under 15.9.2 Thread Group, which should be displayed when you press ^H whilst on the element. [The first time ^H is used, it does not seem to scroll to the correct place; try again]. S. -----Original Message----- From: Mike Darretta [mailto:[EMAIL PROTECTED] Sent: 25 June 2004 17:58 To: JMeter Users List Subject: Re: 2-hour test produces 1 second's worth of results [...] I am also working under the assumption that the DURATION parameter overrides the STOP_TIME parameter. --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] ___________________________________________________________________________ This e-mail and the documents attached are confidential and intended solely for the addressee; it may also be privileged. If you receive this e-mail in error, please notify the sender immediately and destroy it. As its integrity cannot be secured on the Internet, the Atos Origin group liability cannot be triggered for the message content. Although the sender endeavours to maintain a computer virus-free network, the sender does not warrant that this transmission is virus-free and will not be liable for any damages resulting from any virus transmitted. ___________________________________________________________________________ --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
