I am encountering some strange behavior when looking at the throughput column of the summary report with multiple remote machines. Hoping someone could clarify this for me
For example when I have one remote machine and run my test plan with two threads (each request having a random delay of 1-2s and the test plan set to run forever) I am seeing my total throughput stabilize around 1.2/sec which makes sense. When I take the same test plan and bump it up to 4 threads still from one remote machine I am seeing a throughput stabilize of about 2.2/sec which also makes sense (being almost twice what I was seeing with 2 threads) When I run this test plan on 2 remote machines each with 2 threads I would expect to see similar results as running 4 threads on one machine however what I am seeing is the throughput takes a much longer time to stabilize and slowly works its way up from a very low number (showing up as /hour) and never see it come close to the 2.2/sec I was getting from one machine. Any help would be appreciated. Cheers, Josh -- ______________________________ * Joshua E. Auerbach | Software Developer V 802.658.0965 [EMAIL PROTECTED] | www.dealer.com * -- ______________________________ * Joshua E. Auerbach | Software Developer V 802.658.0965 [EMAIL PROTECTED] | www.dealer.com * --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
