This is revised slightly just in the way draw objects and coordinates
are referenced..
Also, "perpendicular" and "plane" added to draw. See that prototype page.
draw PERP $triangle1
#draws a line that is through the geometric center of $triangle 1 and
perpendicular to it.
draw PLANE (atomno=1) (atomno=2) (atomno=3)
draws a rectangle with one side from atom 1 to atom 2 and the opposite
side through atom 3.
more to come. Enough for now!
The old "spin x, spin y, spin z, spin on/off" is still there, but
I consider it deprecated. FAR better is a full complement of
INTERNAL and FIXED frame rotations and spinning involving
x, y, z, -x, -y, -z, arbitrary axisangle {x y z}, designation
of (atom sets) {x y z} coordinates, and $line1 draw objects
for both fixed and internal spinning and rotating, and designation
of two coordinates or two atom sets or an atom set and a coordinate
for internal coordinate spinning. Test page will be at
http://www.stolaf.edu/people/hansonr/jmol/test/json/spin.htm
momentarily.
*
* spin and rotate are now consolidated here.
* The old "spin x, spin y, spin z" is still there, but
* pretty much deprecated because it is not that useful.
* spin on and spin off still work as well -- and are important
*
* far simpler is
*
* spin x 10
* spin y 10
*
* these are pure x or y spins or
*
* spin axisangle {1 1 0} 10
*
* this is the same as the old "spin x 10; spin y 10" -- or is it?
* anyway, it's better!
*
* note that there are many defaults
*
* spin
* spin 10
* spin x
*
* and several new options
*
* spin -x
* spin axisangle {1 1 0} 10
* spin 10 (atomno=1)(atomno=2)
* spin 20 {0 0 0} {1 1 1}
*
* The INTERNAL keyword indicates that spins or rotations are to be
* carried out in the internal molecular coordinate frame, not the
* fixed room frame.
*
*
* Bob Hanson
*
*
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
_______________________________________________
Jmol-developers mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/jmol-developers
