Dear Christian:
I use the set exportScale. Somewhere in the 10-20 range seems to work well for
3D printing sizes. Not sure if you can set exact dimensions.
Example:
set exportScale (10.0)
-----------------------------
Vincent F. Scalfani, Ph.D.
Assistant Professor
Science and Engineering Librarian
The University of Alabama
(205) 348-5806
@vfscalfani
From: Christian Baerlocher [mailto:christian.baerloc...@mat.ethz.ch]
Sent: Tuesday, September 30, 2014 10:11 AM
To: <jmol-users@lists.sourceforge.net>
Subject: [Jmol-users] exporting x3d files with specifications
Dear Bob,
One of my users wants to export x3d files for 3d printing. It works, but he has
a question. He writes:
"Our 3-D printer expert would like the X3D file with mm units and scaled so the
longest side is under 200 mm? Is that possible?"
Can I specify this somehow?
Thanks for your help
Christian
------------------------------------------------------------------------------
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk
_______________________________________________
Jmol-users mailing list
Jmol-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/jmol-users
