> mohon bantuanya saya sedang berusaha untuk migrasi nich (FC4 ke
> slackware10.2). pertama nginstall hd satanya ngga detect (sekarang sudah
> bisa, makasih banyak buat mas-mas yang menjawab atas jawabanya kemaren :) )
> tapi bootingnya selalu kernel panic. (saya lupa mencatat pesan error nya)
> saya sudah mengupdate kernel bawaan yang 2.4.xx ke 2.6.13 bawaan cd tapi
> hasilnya sama saja. saya juga sudah kompile source kernel 2.6.16.9 yang saya
> download dari situs kernel.org kompilasi bverhasil, tetapi sewaktu boot
> layar malah jadi blanks dan ngga ada respon apa2.????
>
> update kernel ini berhasil dengan mulus ketika saya cobakan di komputer
> teman saya dengan HD ATA, chipset nF3, proc amd642800+.
HD ATA bukan SATA
>
> oya tentang update kernel ini sudah pernah dibahas sebelumnya di milis ini
> (saya juga sudah baca dan saya ikuti), artikel MAS WILLY tentang itu juga
> sudah saya coba, termasuk README.initrd dan panduan dari situs slackware.com.
> tapi kenapa gagal ya?? salahnya ada dimana (bingung)??
dunno, karena tidak diberikan step-2 yang Anda lakukan;-)
btw, dukungan SATA-nya di kompilasi sebagai modul, lalu diload pakai
initrd, atau dikompilasi ke kernel (bukan sebagai modul)? Jika load
modulnya pakai initrd, coba dulu, modul SATAnya dikompilasi langsung
ke kernel
Mungkin ini bisa juga dijarikan referensi (pakai Ubuntu, tapi
kompilasi kernel sendiri):
http://www.ubuntuforums.org/archive/index.php/t-30233.html
misal, dari salah satu komentar posternya:
...........
I just found a better resource and I'm sure many people are still
wondering how to do this. Basically, you need to add the right module
to /etc/modules, but which is the right one?
I think you almost always need to add 'libata' to get things started,
but for most chipsets you also need to add an appropriate low-level
driver from the list below. Please post if you have corrections as I
made best guesses and used google searches to find out which chipsets
each driver supports.
sata_via - VIA chipsets (KT600, KT800, etc)
sata_nv - Nforce 3 (and 2?) chipsets
ahci - Intel ? and other ahci conforming chipsets
ata_adma - Pacific Digital and other adma conforming chipsets
ata_piix - Dell Poweredge and others.
sata_promise - Most Promise chipsets
sata_sil - Silicone Image chipsets (Nforce 2?)
sata_sx4 - Promise FastTrak S150 SX4
sata_svw - PowerPC G5
sata_vsc - Vitesse VSC7174 ? (Some Dells)
So to summarize, to get your SATA drives mounted on boot you'll need
two lines added to /etc/modules: libata and the driver from the list
above that corresponds to your SATA controller.
Hopefully this list helps a few people as it took me a while to get my
VIA chipset working.
.........................
>
> system saya ; proc amd643000+,chipset nF4, HD seagate 80 GB SATA.
>
> -----------------------------------------------+++
> /etc/lilo.conf ---> lampiran
> -----------------------------------------------+++
>
> image = /boot/image_baru_hasil_kompilasi
> initrd = /boot/initrd.gz
> root = /dev/sda7 ---------->bukan /dev/hda7
> label = NewSlack26
> read-only
>
> mohon bantuanya...
--
"Get your facts first, then you can distort them as you please." - Mark Twain
http://jaya.duniasemu.org
"This is my way being a linuxer..."
http://jogja.linux.or.id
http://jogja.linux.or.id/wiki/
Untuk berhenti langganan silahkan kirim email kosong ke:
[EMAIL PROTECTED]
SPONSORED LINKS
| Linux operating system | Linux system | Hosting linux unix web |
| Unix operating system | Unix vs linux | Linux operating system download |
YAHOO! GROUPS LINKS
- Visit your group "jogja-linux" on the web.
- To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
- Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
