Sebenernya chipset WiFi-nya apa sich... Panjang betul log-nya' trakhir yg saya baca soal ethernet card... Chipsetnya apa dulu... Ato gini aja: merk/seri laptopnya... :-?
On Sat, Apr 12, 2008 at 11:54 AM, okta_speedster <[EMAIL PROTECTED]> wrote: > kulanuwun > saya mo beda dikit dari teman2 saya dan para tukang servis komputer > yang selalu nyaranin saya pake windows > saya install slackware 12 di laptop, hasilnya wifi gak ke-detect. data > pci-nya sbb: > [EMAIL PROTECTED]:/home/fajar# lspci -vv > 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory > Controller Hub (rev 03) > Subsystem: Unknown device 1961:5607 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort+ >SERR- <PERR- > Latency: 0 > Capabilities: [e0] Vendor Specific Information > > 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/ > GL960 Integrated Graphics Controller (rev 03) (prog-if 00 [VGA]) > Subsystem: Unknown device 1961:5607 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin A routed to IRQ 5 > Region 0: Memory at f3000000 (64-bit, non-prefetchable) > [size=1M] > Region 2: Memory at d0000000 (64-bit, prefetchable) > [size=256M] > Region 4: I/O ports at 1800 [size=8] > Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- > Queue=0/0 Enable- > Address: 00000000 Data: 0000 > Capabilities: [d0] Power Management version 3 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1- > ,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Bridge: PM- B3+ > > 00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 > Integrated Graphics Controller (rev 03) > Subsystem: Unknown device 1961:5607 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Region 0: Memory at f3100000 (64-bit, non-prefetchable) > [size=1M] > Capabilities: [d0] Power Management version 3 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1- > ,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Bridge: PM- B3+ > > 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB > UHCI Contoller #4 (rev 03) (prog-if 00 [UHCI]) > Subsystem: Unknown device 1961:5607 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium > >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin A routed to IRQ 5 > Region 4: I/O ports at 1820 [size=32] > > 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB > UHCI Controller #5 (rev 03) (prog-if 00 [UHCI]) > Subsystem: Unknown device 1961:5607 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium > >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin B routed to IRQ 11 > Region 4: I/O ports at 1840 [size=32] > > 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 > EHCI Controller #2 (rev 03) (prog-if 20 [EHCI]) > Subsystem: Unknown device 1961:5607 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium > >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin C routed to IRQ 7 > Region 0: Memory at f3404000 (32-bit, non-prefetchable) > [size=1K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+, > D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Debug port > > 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio > Controller (rev 03) > Subsystem: Unknown device 1961:5607 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 10 > Region 0: Memory at f3400000 (64-bit, non-prefetchable) > [size=16K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+, > D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ > Queue=0/0 Enable- > Address: 0000000000000000 Data: 0000 > Capabilities: [70] Express Unknown type IRQ 0 > Device: Supported: MaxPayload 128 bytes, PhantFunc 0, > ExtTag- > Device: Latency L0s <64ns, L1 <1us > Device: Errors: Correctable- Non-Fatal- Fatal- > Unsupported- > Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ > Device: MaxPayload 128 bytes, MaxReadReq 128 bytes > Link: Supported Speed unknown, Width x0, ASPM unknown, > Port 0 > Link: Latency L0s <64ns, L1 <1us > Link: ASPM Disabled CommClk- ExtSynch- > Link: Speed unknown, Width x0 > Capabilities: [100] Virtual Channel > Capabilities: [130] Unknown (5) > > 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express > Port 1 (rev 03) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=02, subordinate=09, sec-latency=0 > I/O behind bridge: 00002000-00002fff > Memory behind bridge: f1800000-f1ffffff > Prefetchable memory behind bridge: 00000000f0000000- > 00000000f07fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- > Capabilities: [40] Express Root Port (Slot+) IRQ 0 > Device: Supported: MaxPayload 128 bytes, PhantFunc 0, > ExtTag- > Device: Latency L0s unlimited, L1 unlimited > Device: Errors: Correctable+ Non-Fatal+ Fatal+ > Unsupported+ > Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > Device: MaxPayload 128 bytes, MaxReadReq 128 bytes > Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, > Port 1 > Link: Latency L0s <1us, L1 <4us > Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- > Link: Speed 2.5Gb/s, Width x0 > Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ > Surpise+ > Slot: Number 2, PowerLimit 6.500000 > Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- > HPIrq- > Slot: AttnInd Unknown, PwrInd Unknown, Power- > Root: Correctable- Non-Fatal- Fatal- PME- > Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- > Queue=0/0 Enable- > Address: 00000000 Data: 0000 > Capabilities: [90] Subsystem: Unknown device 1961:5607 > Capabilities: [a0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1- > ,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [100] Virtual Channel > Capabilities: [180] Unknown (5) > > 00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express > Port 3 (rev 03) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=0a, subordinate=11, sec-latency=0 > I/O behind bridge: 00003000-00003fff > Memory behind bridge: f2000000-f27fffff > Prefetchable memory behind bridge: 00000000f0800000- > 00000000f0ffffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- > Capabilities: [40] Express Root Port (Slot+) IRQ 0 > Device: Supported: MaxPayload 128 bytes, PhantFunc 0, > ExtTag- > Device: Latency L0s unlimited, L1 unlimited > Device: Errors: Correctable+ Non-Fatal+ Fatal+ > Unsupported+ > Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > Device: MaxPayload 128 bytes, MaxReadReq 128 bytes > Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, > Port 3 > Link: Latency L0s <256ns, L1 <4us > Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- > Link: Speed 2.5Gb/s, Width x1 > Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ > Surpise+ > Slot: Number 4, PowerLimit 6.500000 > Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- > HPIrq- > Slot: AttnInd Unknown, PwrInd Unknown, Power- > Root: Correctable- Non-Fatal- Fatal- PME- > Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- > Queue=0/0 Enable- > Address: 00000000 Data: 0000 > Capabilities: [90] Subsystem: Unknown device 1961:5607 > Capabilities: [a0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1- > ,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [100] Virtual Channel > Capabilities: [180] Unknown (5) > > 00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express > Port 4 (rev 03) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=12, subordinate=19, sec-latency=0 > I/O behind bridge: 00004000-00004fff > Memory behind bridge: f2800000-f2ffffff > Prefetchable memory behind bridge: 00000000f1000000- > 00000000f17fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- > Capabilities: [40] Express Root Port (Slot+) IRQ 0 > Device: Supported: MaxPayload 128 bytes, PhantFunc 0, > ExtTag- > Device: Latency L0s unlimited, L1 unlimited > Device: Errors: Correctable+ Non-Fatal+ Fatal+ > Unsupported+ > Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > Device: MaxPayload 128 bytes, MaxReadReq 128 bytes > Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, > Port 4 > Link: Latency L0s <1us, L1 <4us > Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- > Link: Speed 2.5Gb/s, Width x0 > Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ > Surpise+ > Slot: Number 5, PowerLimit 6.500000 > Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet+ CmdCplt- > HPIrq- > Slot: AttnInd Unknown, PwrInd Unknown, Power- > Root: Correctable- Non-Fatal- Fatal- PME- > Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- > Queue=0/0 Enable- > Address: 00000000 Data: 0000 > Capabilities: [90] Subsystem: Unknown device 1961:5607 > Capabilities: [a0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1- > ,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [100] Virtual Channel > Capabilities: [180] Unknown (5) > > 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB > UHCI Controller #1 (rev 03) (prog-if 00 [UHCI]) > Subsystem: Unknown device 1961:5607 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium > >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin A routed to IRQ 11 > Region 4: I/O ports at 1860 [size=32] > > 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB > UHCI Controller #2 (rev 03) (prog-if 00 [UHCI]) > Subsystem: Unknown device 1961:5607 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium > >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin B routed to IRQ 11 > Region 4: I/O ports at 1880 [size=32] > > 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB > UHCI Controller #3 (rev 03) (prog-if 00 [UHCI]) > Subsystem: Unknown device 1961:5607 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium > >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin C routed to IRQ 7 > Region 4: I/O ports at 18a0 [size=32] > > 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 > EHCI Controller #1 (rev 03) (prog-if 20 [EHCI]) > Subsystem: Unknown device 1961:5607 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium > >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at f3404400 (32-bit, non-prefetchable) > [size=1K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+, > D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Debug port > > 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3) > (prog-if 01 [Subtractive decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Bus: primary=00, secondary=1a, subordinate=1a, sec-latency=32 > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium > >TAbort- <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- > Capabilities: [50] Subsystem: Gammagraphx, Inc. Unknown device > 0000 > > 00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface > Controller (rev 03) > Subsystem: Unknown device 1961:5607 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium > >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Capabilities: [e0] Vendor Specific Information > > 00:1f.2 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) > SATA IDE Controller (rev 03) (prog-if 80 [Master]) > Subsystem: Unknown device 1961:5607 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium > >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 0 > Interrupt: pin B routed to IRQ 11 > Region 0: I/O ports at 01f0 [size=8] > Region 1: I/O ports at 03f4 [size=1] > Region 2: I/O ports at 0170 [size=8] > Region 3: I/O ports at 0374 [size=1] > Region 4: I/O ports at 18e0 [size=16] > Region 5: I/O ports at 18d0 [size=16] > Capabilities: [70] Power Management version 3 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1- > ,D2-,D3hot+,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller > (rev 03) > Subsystem: Unknown device 1961:5607 > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium > >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Interrupt: pin C routed to IRQ 11 > Region 0: Memory at 50000000 (32-bit, non-prefetchable) > [size=256] > Region 4: I/O ports at 1c00 [size=32] > > 0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/ > 8168B PCI Express Gigabit Ethernet controller (rev 01) > Subsystem: Unknown device 1961:4605 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR+ FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR+ <PERR- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 7 > Region 0: I/O ports at 3000 [size=256] > Region 2: Memory at f2000000 (64-bit, non-prefetchable) > [size=4K] > [virtual] Expansion ROM at f0800000 [disabled] [size=128K] > Capabilities: [40] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-, > D1+,D2+,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [48] Vital Product Data > Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ > Queue=0/1 Enable- > Address: 0000000000000000 Data: 0000 > Capabilities: [60] Express Endpoint IRQ 0 > Device: Supported: MaxPayload 1024 bytes, PhantFunc 0, > ExtTag+ > Device: Latency L0s <1us, L1 unlimited > Device: AtnBtn+ AtnInd+ PwrInd+ > Device: Errors: Correctable- Non-Fatal- Fatal- > Unsupported- > Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > Device: MaxPayload 128 bytes, MaxReadReq 512 bytes > Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, > Port 0 > Link: Latency L0s unlimited, L1 unlimited > Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- > Link: Speed 2.5Gb/s, Width x1 > Capabilities: [84] Vendor Specific Information > Capabilities: [100] Advanced Error Reporting > Capabilities: [12c] Virtual Channel > Capabilities: [148] Device Serial Number 68-81-ec-10-00-00-0d- > 00 > Capabilities: [154] Power Budgeting > ngikutin perintah digoogle seperti itu. > bisa kasih jalan yang harus saya lakukan selain ganti kernel (soale > dah banyak coba, kernel panik terus. bikin initrd, perintahnya seperti > ini mkinitrd -c -k 2.6.24.4 reiserfs -m gagal terus, katanya tidak ada > modul dep 2.6.24.4, wong yang jalan kernel slackware current. > sebelumnya saya ucapkan terima kasih atas pencerahan yang diberikan > salam > fajar > > > -- real_name: Fathoni Wahyu Utama (Fath) a.k.a : iceman, hyorinmaru, telur terlalu matang birth : December, 5th 1977 blog : http://hyorinmaru.wordpress.com sex : male marital_status : single, awaiting_connection/searching OS_of_the_choice : GNU/Linux main_of_interest : GNU, Linux, open source, free software, system/shell programming, Slackware -- [Non-text portions of this message have been removed]
