Pada 5 Agustus 2008 13:25, Tonny Sapri <[EMAIL PROTECTED]> menulis: > Mohon informasi, > ada yang tahu cara mount card reader merk epraizer? > > saya coba tampilkan dengan perintah lsusb dan dmesg |tail, > device tersebut terdeteksi. > hasil terlihat dibawah. > > Ini hasil dmesg saya: > usb 1-2: new full speed USB device using uhci_hcd and address 3 > usb 1-2: configuration #1 chosen from 1 choice > scsi3 : SCSI emulation for USB Mass Storage devices > usb-storage: device found at 3 > usb-storage: waiting for device to settle before scanning > kobject_add failed for usb_storage with -EEXIST, don't try to register things > with the same name in the same directory. > [<c03e86f7>] kobject_shadow_ add+0x117/ 0x1a0 > [<c013fba4>] mod_sysfs_setup+ 0x24/0xb0 > [<c0141458>] sys_init_module+ 0x1648/0x1940 > [<c0102ae8>] syscall_call+ 0x7/0xb > [<c0710000>] __mutex_lock_ slowpath+ 0x40/0x90 > ============ ========= == > scsi 3:0:0:0: Direct-Access Generic USB CF Reader 0.00 PQ: 0 ANSI: 2 > sd 3:0:0:0: Attached scsi removable disk sda > sd 3:0:0:0: Attached scsi generic sg0 type 0 > usb-storage: device scan complete > > terima kasih komentarnya. >
> kobject_add failed for usb_storage with -EEXIST, don't try to register things > with the same name in the same directory. Kalau dilihat di baris ini.. sepertinya kernel kesulitan untuk mengenali chipset di memcard reader yang digunakan... utnuk solusinya.. masih belum tahu.. mungkin ada rekan lain mau menambahkan? --- http://fathirhamdi.wordpress.com
