Mohon informasi,
ada yang tahu cara mount card reader merk epraizer?
saya coba tampilkan dengan perintah lsusb dan dmesg, device tersebut
terdeteksi. bisa dilihat ketr file dmesg dibawah.
tapi kalau dilihat di /dev ga ada file sda1.
padahal kalau saya menggunakan card reader merk lain file tsb selalu
terbentuk. sehinga kalau mount manual /dev/sda1 jarang gagal.
---------------------------------------------------
Ini hasil dmesg saya :
usb 1-2: new full speed USB device using uhci_hcd and address 3
usb 1-2: configuration #1 chosen from 1 choice
scsi3 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
kobject_add failed for usb_storage with -EEXIST, don't try to register things
with the same name in the same directory.
[<c03e86f7>] kobject_shadow_add+0x117/0x1a0
[<c013fba4>] mod_sysfs_setup+0x24/0xb0
[<c0141458>] sys_init_module+0x1648/0x1940
[<c0102ae8>] syscall_call+0x7/0xb
[<c0710000>] __mutex_lock_slowpath+0x40/0x90
=======================
scsi 3:0:0:0: Direct-Access Generic USB CF Reader 0.00 PQ: 0 ANSI: 2
sd 3:0:0:0: Attached scsi removable disk sda
sd 3:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete
terima kasih tanggapannya.
___________________________________________________________________________
Bergabunglah dengan orang-orang yang berwawasan, di di bidang Anda! Kunjungi
Yahoo! Answers saat ini juga di http://id.answers.yahoo.com/
