Hi! We ware using JSch for a long time for executing commands on Linux and AIX. For us it works perfect.
The only problem we have is a performance issue: When you execute a command on Unix using the ChannelExcec which generates a big output and you read these output, it takes a long time. E.g. a "cat filename" for a 5 mb file takes about 17 seconds. When you transfer the same file with sftp (ChannelSftp), the transfer takes under 1 second. It is obvious to me that cat-ing a file and reading the file with a stream takes always longer than transfering bytes, but the differences between 17 and 1 seconds seems a little bit to big. I have tries version 0.1.42 and 0.1.43. Mit freundlichen Grüßen Boris Klug -- Boris A. Klug Debeka-Hauptverwaltung Abteilung BO/Q Ferdinand-Sauerbruch-Str. 18 56058 Koblenz E-Mail: [email protected] Internet: www.debeka.de Debeka Krankenversicherungsverein a. G., AmtsG Koblenz: HRB 125 Debeka Lebensversicherungsverein a. G., AmtsG Koblenz: HRB 141 Debeka Allgemeine Versicherung AG, AmtsG Koblenz: HRB 2300 Debeka Pensionskasse AG, AmtsG Koblenz: HRB 6683 Vorstand: Uwe Laue (Vorsitzender), Rolf Florian, Roland Weber, Thomas Brahm, Dr. Peter Görg Aufsichtsratsvorsitzender: Peter Greisler Sitz Koblenz am Rhein Debeka Bausparkasse Aktiengesellschaft, Amtsgericht Koblenz: HRB 1114 Vorstand: Jörg Phlippen, Dirk Botzem Aufsichtsratsvorsitzender: Peter Greisler Sitz Koblenz am Rhein ------------------------------------------------------------------------------ This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev _______________________________________________ JSch-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/jsch-users
