Hi Peter Here is what is importent about setting the track inspector up.
You must go in to display, and disable everything else but E Q, and plot. Then all parameters should be available to ya. But you change bands by pressing enter on the band 1 name, and select the band you want to operate with the arrow keys. Best regards Brian From: [email protected] [mailto:[email protected]] On Behalf Of Peter Torpey Sent: 26. september 2010 03:01 To: 'JSonar -- JAWS Scripts for Sonar discussion list' Subject: Re: [Jsonar] Using Track EQ in Track Inspector Andy, I've been trying out some of your suggestions below for using the per track eq from the track inspector pane of sonar. I am using the latest version of the scripts (build 1195) as well as sonar 8.53. I am having two problems and am wondering if you have any advice or if this is something that just doesn't work with the JSonar scripts: 1. No matter what fields I turn on/off in the Display settings and what I choose to turn on in the Modules options, I can only see parameters for the first two eq bands. Thus, even if I try and show all 4 bands that are allowed, only two show up in the list of options in the track inspector. 2. Despite the fact that I click on the "enable eq 1" options in the track inspector, I don't hear any difference in the output. What I did here was: a. Choose a particular band of audio which I previously had recorded. b. Play the audio back and kept changing the eq parameters for this track. I didn't hear any differences. c. Is it possible that this per track eq capability only works for recording audio and not for playback? Anyway, if you have any advice, please let me know. Thanks. I'm trying to apply different eq levels to each of several tracks in a project. --Pete From: [email protected] [mailto:[email protected]] On Behalf Of Andy B. Sent: Thursday, August 05, 2010 4:09 AM To: 'JSonar -- JAWS Scripts for Sonar list' Subject: Re: [Jsonar] Using Track EQ in Track Inspector 1. In track inspector, Press enter on module options and make sure that eq and pan are checked. 2. In track inspector, go to display, press enter and uncheck everything except fx and plot and eq. 3. When you arrow through the controls, you will see by default 1 band of eq at a time. This is the eq parameters for a band at a time. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Peter Torpey Sent: Wednesday, August 04, 2010 9:51 PM To: 'JSonar -- JAWS Scripts for Sonar list' Subject: [Jsonar] Using Track EQ in Track Inspector Are the Track EQ parameters accessible using JSonar? I couldn't figure out how to view and/or use the track EQ parameters from within the track inspector. The Sonar help file says one has to optionally turn this on via the console view (which is not accessible using JSonar). --Pete No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.851 / Virus Database: 271.1.1/3051 - Release Date: 08/04/10 11:07:00
_______________________________________________ Find JSonar and Sonar FAQs, articles, guides and downloads at jsonar.org. Jsonar mailing list [email protected] http://jsonar.org/mailman/listinfo/jsonar_jsonar.org
