As a jts newbie - I might have got this wrong! It looks like the createArc function does not create a point at the end of the arc. Whilst this is OK for some applications, e.g. stringing arcs together; it is not OK for others. If this is correct, please could you add a (boolean) option to create the last point if required.
Also, I tend to reuse GeometricShapeFactory for different objects, and I have noticed that for arcs if Width and Height have been (previously) set then these supersede Size (which I am setting to the diameter for circular arcs). Would it be possible to allow setting the Width and Height to zero and so allow the Size to dominate? Jim Jim Kay Senior Engineer Interfleet Technology Ltd email: [EMAIL PROTECTED] tel: +44 (0) 1332 223229 fax: +44 (0) 1332 223181 mobile: +44 (0) 7715 536828 web: www.interfleet-technology.com Interfleet Technology Ltd Interfleet House Pride Parkway Derby DE24 8HX ********************************************************************** Interfleet Technology Ltd Interfleet Technology's email disclaimer is found via the following URL: http://www.interfleet-technology.com/disclaimer Registered Offices: http://www.interfleet-technology.com/offices.asp Please consider the environment before printing this e-mail. **********************************************************************
_______________________________________________ jts-devel mailing list [email protected] http://lists.refractions.net/mailman/listinfo/jts-devel
