My apologies - when I ran ConformingDelaunayTriangles in the TestBuilder
with your input, I was not setting the constraints. When I do this (by
loading the polygons as the B geometry) I see the same error you were
getting.
I've just updated the TestBuilder to allow providing a tolerance value, and
can confirm that it only works when the tolerance is > 3.5, as you said.
This is obviously much too large. Not sure why this is problem right now.
It may be because there are some segments which are almost parallel.
On Thu, Dec 5, 2013 at 8:39 AM, Martin Davis <[email protected]> wrote:
> The sites are the A geometry, and the constraints are the B geometry.
>
>
> On Thu, Dec 5, 2013 at 2:01 AM, Brian Sanjeewa Rupasinghe <
> [email protected]> wrote:
>
>> Yes, That is the function i used in JTS TestBuilder. But there is no way
>> to set constraints in that...
>>
>> Brian.
>>
>>
>>
>>
------------------------------------------------------------------------------
Sponsored by Intel(R) XDK
Develop, test and display web and hybrid apps with a single code base.
Download it for free now!
http://pubads.g.doubleclick.net/gampad/clk?id=111408631&iu=/4140/ostg.clktrk
_______________________________________________
Jts-topo-suite-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/jts-topo-suite-user
